Give your modern LCD/ Plasma TV a contemporary companion by means of Elevations TV Stand from Z-line. This contemporary TV stand has a black glossy powder coat metal frame with black tempered safety glass shelves for components. The open shelves allow proper air circulation and the back has wire management for hiding cords and cables. Accommodating most LCD / Plasma TV's up to 42 inch, Elevations TV Stand is sure to enhance your room décor.

Dual-Arm Wall Mount supports any Flat Screen Plasma or LCD Screen up to 80 pounds. For larger LCD and Plasma displays, the dual arms of the mount provide for a much more stable and level display as the arms are extended up to 27 inch. A significant improvement over single arm designs Approximately 120 Degrees of side-to-side motion of the wall arms Supports 32" 37", 40", 42", 46", 50", 56" 60" LCD and Plasma TVs Up to 15 degrees of screen down tilt. The nested wall arms also fold inside each other when pushed flat to give the mount a very slim 4". The wall panel is 18" widewall plate supports block wall installation or installation on either 8", 12" or 16" wall studs. The thick steel wall plate also has 2 pass through holes so that cables and cords can be fished into the wall interior for... Less

This plasma stand is equipped with two custom banner graphics and two metal literature trays. The VESA compatible bracket can hold a television ranging from 32" to 42", weighing up to 70lbs. This plasma stand has locking wheels for portability. You can also use our How-To page for further information on how to find a mounting bracket to fit your monitor. This plasma TV stand uses banner grippers to hold (2) 19" x 36" on each side to better promote your business. A plasma TV stand, like a screen stand and an LCD stand, has (2) metal pockets that can hold either magazines or brochures to give further information to customers. The LCD stand, plasma TV stands comes with a 200 x 200 VESA bracket to mount your 32" to 42" LCD or plasma television, weighing less than 70 lbs. VESA brackets are... Less

Optional Plasma/LCD TV Shelf for MGV-3 (only), Black or Silver Shelf bracket easily bolts directly to MGV-3 (only) Top shelf is adjustable from 7 to 10 Wire guides are included to hide wires on rear frame Unique style makes LCD/Plasma TV's appear to float above the bottom 3 shelves Center-channel speakers can be placed directly below the TV Heavy-duty glass will not vibrate when center channel speaker is placed on it Supports up to 175 lbs. DIMENSIONS: 36"W x 10"D x 7-10H

This Universal wall mount is the Slimmest universal PLASMA and LCD mount in the world (only .98" from the wall). This universal flat wall mounts will work with most Plasma TV screen and LCD screens from 37" to 55". The super flat design is easy to install and remove. All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs... Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are... Less

The New Ideal Sales Articulating Wall Mount will fit any 32" -55" Inch Flat Screen Panel: (This includes: Plasma/LCD/LED Panels). The mount is a very flexible mount for flat panel displays. The Articulating bracket extends up to 26" for viewing in multiple locations. The cantilever mounts offer maximum adjustability, including horizontal extension, 180º of lateral rotation, as well as full swiveling and tilting capabilities. More than just mounting hardware, these cantilever mounts have a tactile quality that enhances the high technology aspects of any flat LED/LCD/Plasma panel installation.

The New Ideal Sales Articulating Wall Mount will fit any 32" -55" Inch Flat Screen Panel: (This includes: Plasma/LCD/LED Panels). The mount is a very flexible mount for flat panel displays. The Articulating bracket extends up to 26" for viewing in multiple locations. The cantilever mounts offer maximum adjustability, including horizontal extension, 180º of lateral rotation, as well as full swiveling and tilting capabilities. More than just mounting hardware, these cantilever mounts have a tactile quality that enhances the high technology aspects of any flat LED/LCD/Plasma panel installation.

Save space and mount your flat screen monitor on the wall! This Plasma/LCD TV Wall Mount Bracket accommodates most screens from 36-inches to 70-inches with a maximum load of up to 165 lbs.! This Wall Mount Bracket features various display adjustments such as vertical, tilt, swivel, 45 pan and stowing the screen for maximum viewing and an integrated bubble level to ensure a level mount! Order today!

This is Angle Adjustable Wall Bracket for LCD Plasma. This Flat Wall Mount supports any 32" to 63" flat panel screen and plasma TVs up to 165 lb weight. The slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs, or concrete. Easy to install. High Quality Toughened Steel,Scratch resistant surface,Silver Finish. Tilt adjustment system offers either fixed 0 degree position or fixed 15 degree downward tilt. Fits most large flat panel plasma and LCD TVs 32-65". Supports up to 165 lbs / 75 kgs. Mounting bolts and screws included. Fits to 32~63inch

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 26 inches from the wall. Its dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Is this the mount for me? * Do you prefer the look and feel of the dual arm design, and appreciate its incredible sturdiness? Product Features * Continuous angle adjustment with glossy, black knobs. * Security locking mechanism to prevent the TV from unlatching from wall. Will this mount fit my flat screen? * This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be less than 680mm apart... Less

VideoSecu wall mount is one of the strongest mounts on the market today. The mount is a full-motion wall mount for 37"-55" TVs up to 165 lbs. This articulating mount supports TV VESA 200x100 200x200 300x100 300x200 300x300 400x100 400x200 400x300 400x400 500x100 500x200 500x300 500x400 600x100 600x200 600x300 600x400mm.The tilt controller allows smooth, easy adjustment to reduce glare and find the perfect angle. Full motion design allows maximum flexibility tilt, swivels up to 120 degree side-to-side and extend the flat panel screen up to 25" from the wall for perfect view positioning. Post- installation level adjustment allows the TV to perfectly level. Integrated cable management design on arm prevents cable pinching. This mount is VideoSecu brand. Please report to Amazon if the product... Less

The New Ideal Sales Articulating Wall Mount will fit any 32" -55" Inch Flat Screen Panel: (This includes: Plasma/LCD/LED Panels). The mount is a very flexible mount for flat panel displays. The Articulating bracket extends up to 26" for viewing in multiple locations. The cantilever mounts offer maximum adjustability, including horizontal extension, 180º of lateral rotation, as well as full swiveling and tilting capabilities. More than just mounting hardware, these cantilever mounts have a tactile quality that enhances the high technology aspects of any flat LED/LCD/Plasma panel installation.

This is our best selling swivel tv mount, and for good reason. It offers extreme versatility with a maximum extension of 20 inches from the wall. The dual arm design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of the dual arm design, and appreciate its incredibly sturdiness? Does a 20 inch wall extension meet your installation needs? Then this mount is for you! This mount works with 99% of flat screen TVs on the market. For 100% certainty, however, please refer to the Compatibility Checklist below. Compatibility Checklist * Mounting holes on television should be 30 inches or less apart horizontally & 18.75 inches or less apart vertically. This corresponds to a maximum vesa of 750×450 * Your TV should weigh less... Less

This dual cantilever arm mounts are a breakthrough in flat panel mount design, combining strength, easy installation, and striking product design that is unparalleled in the industry. The dual two-link arm design provides up to 160 degrees of swivel and tilt 15 degree up and down for virtually limitless viewing positions. Post- installation level adjustment allows the TV to perfectly level. Fits most flat panel LCD TVs up to 55". Recommended use for flat panel TV weights less than 165 lbs. This mount is VideoSecu brand. Please report to Amazon if the product you received do not bear VideoSecu logo.

This high quality tilting wall mount bracket supports most* 36" to 63" flat panel screen LCD/plasma TVs and monitors. The mount includes simple to align brackets and a unique wall plate that can be mounted to two studs or concrete and comes with mounting hardware and installation instructions for a quick and easy installation. It's toughened steel construction supports up to 165lbs and has a variable 0° to -15° downward tilt. *Mounting holes on television should be 28" or less apart horizontally and 18.5" or less apart vertically

PRODUCT SPECIFICATIONS * Fit most 26" 42" Flat Panel TV. * VESA compliance: 100 x 100mm - 200 x 200mm. * Weight capacity: 80lbs (36,4kg). * Tilt angle: -5° / +15°. * Material: ALU arms with anodizing finished. * Colors: Silver/Black. PACKAGE SPECIFICATIONS Quantity: 1 PC. Net wight: 79,28lbs (4,21kg). Gross weight: 10,27lbs (4,66kg). Pack Dim: 40,5 x 23 x 8cm.

The single articulating arm, which attaches to any wall, creates the perfect viewing angle for your TV with 180 degree lateral rotation, tilt and swivel. The Articulating LCD Wall Arm supports most 37" up to 55" plasma TV. It folds flat against the wall or extends out up to 27". The single arm design provides 15 degree tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Fits VESA200x200, 300x300, 400x200, 400x400, 500x200, 600x400, 600x200, 680x400, and any mounting hole pattern between 200 and 680mm (wide) by 200 to 400mm (High). Fits most flat panel LCD TVs up to 55". Heavy-gauge steel construction. Lift-N-Lock design offers easy installation. Please check the back of your LCD to make sure if the mount fits your monitor or TV. Note: please check what mount... Less

This is our best selling tv mount, and for good reason. The smooth tilt design is incredibly sturdy, and supports a wide range of plasma and LCD flat screen televisions. Do you prefer the look and feel of this simple tilt adjustable design, and appreciate its incredibly sturdiness? Does a mount like this meet your installation needs? Then this mount is for you! This Universal Tilting wall mount will work with most Plasma TV screen and LCD screens from 37" to 55". The super Flush Tilt design is easy to install and remove. Easy to install and compatible with over 95% of current screens by major manufacturers. All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall... Less

New Z-Line Flat Panel Tv Stand With Integrated Mount Up To 50-in Flat Panel Tvs New but opened box Z-Line Designs Mt. Helena Flat Panel TV Stand with Integrated Mount - Stand for plasma / LCD / TV ( Swivel Design ) - metal - black - screen size: 36" - 50" Featuring a striking design sure to turn heads, the Mt. Helena Flat Panel TV Stand from Z-Line Designs is just the thing for your home theater. With a contemporary glossy powder coat frame, clear safety glass with border and chrome cylinder glass supports, this TV stand is a work of art in itself. Contemporary glossy powder coat frame Clear tempered safety glass Chrome cylinder glass supports Swivel mount allows multi positioned viewing Accommodate up to most 50-inch LCD/plasma TVs Open shelves for proper air circulation Wire management... Less

This Super strong Dual Arm wall mount will fit most flat panel plasma and LCD LED TVs with mounting patterns up to VESA 680x460. Note: Mounting holes on television should be 26.8 in or less apart horizontally and 18.1 in or less apart vertically. VideoSecu articulating mount, standard mounting hardware, user manual and HDMI cable included in the package.

These new dual arm cantilever mounts are a breakthrough in flat panel mount design, combining strength, easy installation, and striking product design that is unparalleled in the industry. The dual two-link arm design provides tilt forward and backward and up to 160 degrees of swivel for virtually limitless viewing positions. Fits most flat panel LCD TVs up to 55". Recommended use for flat panel TV weights less than 165 lbs.

If your TV model number is not listed, please contact us. We will be happy to check compatibility for you. You also can check it by yourself. Please check the back of your LCD to make sure if the mount fits your monitor or TV. Note: please check what mount your TV requires before place your order. Do not pick the mount by the screen size of your TV. Will This mount Fit my Plasma TV? First check the weight of the TV. It must be less than 180 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within - 15.75 inch, horizontal distance within 26.77 inch, then this bracket will fit. If you currently have a stand attached to your LCD TV this is... Less

This is the most heavy-duty TV Wall Mount on the market & wall panels are cut from two solid metal sheets (not like 4 pieces of slim & flimsy metals connected by 4 screws like the other) . The mount profile is 1.8" in the flat position yet provides for up to 15 degrees of downward tilt; support TV system up to 120 lbs. It's designed to support most TVs from 20" to 42" WITH MOUNTING HOLE PATTERNS up to 15.75" horizontally & 15.75" vertically (400x400 mm). It may fits some 47" TV models as long as the TV complies with VESA 400x400 mm hole pattern.

Specification: Mount Type: Wall Color: Black Mounting Pattern: 725*480 Movable: Tilt Range: +15° to -15° TV Size: 32"-60" TV Weight Capacity: MAX load 132 lbs / 60kgs Dimention & Weight: Height: 350mm/13.78" Width: 695mm/27.36" Min distance from wall: 36mm/1.42" Max distance from wall: 42mm/1.65" Weight: About 4.5kg/9.95lbs Manufacturer Warranty: 1 Years limited Package includes: 1 x Tilt Wall Mount Bracket Screws / fixings supplied for most common installations

SKU Number: 63543 Elipse 36 Inch TV Stand with Black Glass Features Specifications :Product Type :TV Stand Finish :Black Style :Traditional Material :Wood Products Weight :68 lbs Glass :Yes Legs Material :Wood Max TV Size :Up to 36" Flat Screen TV Casters :No Shelves :Yes Frame Design :Open Shelving TV Stand Drawers :No Collection :Saltillo Overall Dimensions : 27.25" H x 35.75" W x 22" D Features :Appealling, Contempory design compliments TV stand, Fits up to 36" Flat Screen TV, Side storage S