One For All Kameleon URC-6690 LCD Remote Control
Out of stock |
Similar in Remote Controls
- Type: Universal Learning
- Universal Remote Control Type: Learning
- Devices Controlled: 6
- Overview
-
Reviews
-
Compare Prices
User ReviewRead All Reviews »
Basic functions-check, Annoying quirk-check
Pros
Only one remote on my coffee table. All others in a near by drawer.
Cons
Won't work unless touch pad is on. Very annoying.
Recommended it?
No
The Bottom Line:
Don't buy this remote. You can get this exact model without the Kameleon touch pad or one that is backlit with the same functionality made by OneForAll.
I programmed my remote last night. So here is how it went:
I tried the TV first: Found the right code, and then realized that I only use the power, input, aspect ratio and volume. I changed the channel up and down buttons to operate the cable box channels.
DVD player: None of the CyberHome DVD player codes worked. I started searching for the code and decided that teaching it buttons would be quicker. I added the power menu, play buttons, toggle and ok button. That was easy and quicker than searching for a code.
The home theater: The Yamaha HT did not respond to any of the Yamaha codes listed in the book. As with the DVD player I taught the remote input devices, volume, channel up and down (for radio stations) and tonight I will put in the pre set equalizer buttons on the number keypad.
The cable box: Surprisingly the remote operated most of the cable box features. I had to teach it the ABC buttons from the Atlanta Scientific cable box/DVR but that was easy enough. I put the A button in place of mute since I use it most often. I use volume from the HT and TV and B and C are at the bottom of the remote.
Good Features:
This remote is very easy to use. It is very easy to teach. I would recommend it to anyone who only uses the basic features of their units and intends to keep the original remotes in a drawer near by just incase. It does everything I need it to without being complicated at all.
Needed improvements.
If you want to do anything with this remote first you must push a button to light the touch pad. The button you push does not do anything so it doesn't matter which one you choose. After that, buttons will function normally. This function also includes hard buttons like volume and channel. If the touch pad is not lighted and you want to go one channel up you have to push channel up twice. If the touch pad is lighted and you want to go one channel up you hit channel up once. That is just plain retarded.
Here is an idea. How about if you want to use the touch screen buttons you push the touch screen first to light it, then use the buttons on it but if you want to adjust the channel or any hard button by feel you just push it once. I mean you can find the touch screen in the dark. It has an unmistakable feel. The end user is the one the designer is supposed to be keeping happy. I cant believe they didnt think this through better.
Here is another suggestion add another battery or two. Their only job in life would be to light the keypad. I mean I already bought rechargeable batteries for this thing because I expect them to last less than a month before I have to swap them out, but two more aren't going to kill me. Besides a heavy remote might make me feel like it is of a higher quality even though I added the weight with the battery myself.
I like the lay out and size of all buttons from vol mute channel up, the input button needs to be where the sleep or prev button is. Every person in the world changes the input device to their TV more than just about anything else they do. Any time they use a different piece of equipment from the DVD to cale/satelite to video games they change the input. That button needs to be accessible without rearranging your hand.
In closing: I like this remote. It will do exactly what I bought it for - relieve me of the stack of remotes that I use when I watch television via my cable box, or DVD's, both while listening to the sound through my home theater. It is not a complicated set up, and I don't utilize all of the functions of my units or remotes. I use the basic functions only. My only real dislike is that you have to wake the remote up by pushing a button before you do anything. I don't see a need for the remote to wake up when hard buttons are pressed, but that is just my opinion. If I had to buy this remote again I would either get this one or another made by OneForAll.
I am going to use a paint pen and home made stencil to label the ABC buttons onto the body of my remote for use with the cable box, and might find a way to label other functions I programmed onto the remote so that I don't forget them. Any suggestions on how to do this would be greatly appreciated, as there is limited space to work with. Perhaps clear stickers would work. But they would have to be small and labeled.
I tried the TV first: Found the right code, and then realized that I only use the power, input, aspect ratio and volume. I changed the channel up and down buttons to operate the cable box channels.
DVD player: None of the CyberHome DVD player codes worked. I started searching for the code and decided that teaching it buttons would be quicker. I added the power menu, play buttons, toggle and ok button. That was easy and quicker than searching for a code.
The home theater: The Yamaha HT did not respond to any of the Yamaha codes listed in the book. As with the DVD player I taught the remote input devices, volume, channel up and down (for radio stations) and tonight I will put in the pre set equalizer buttons on the number keypad.
The cable box: Surprisingly the remote operated most of the cable box features. I had to teach it the ABC buttons from the Atlanta Scientific cable box/DVR but that was easy enough. I put the A button in place of mute since I use it most often. I use volume from the HT and TV and B and C are at the bottom of the remote.
Good Features:
This remote is very easy to use. It is very easy to teach. I would recommend it to anyone who only uses the basic features of their units and intends to keep the original remotes in a drawer near by just incase. It does everything I need it to without being complicated at all.
Needed improvements.
If you want to do anything with this remote first you must push a button to light the touch pad. The button you push does not do anything so it doesn't matter which one you choose. After that, buttons will function normally. This function also includes hard buttons like volume and channel. If the touch pad is not lighted and you want to go one channel up you have to push channel up twice. If the touch pad is lighted and you want to go one channel up you hit channel up once. That is just plain retarded.
Here is an idea. How about if you want to use the touch screen buttons you push the touch screen first to light it, then use the buttons on it but if you want to adjust the channel or any hard button by feel you just push it once. I mean you can find the touch screen in the dark. It has an unmistakable feel. The end user is the one the designer is supposed to be keeping happy. I cant believe they didnt think this through better.
Here is another suggestion add another battery or two. Their only job in life would be to light the keypad. I mean I already bought rechargeable batteries for this thing because I expect them to last less than a month before I have to swap them out, but two more aren't going to kill me. Besides a heavy remote might make me feel like it is of a higher quality even though I added the weight with the battery myself.
I like the lay out and size of all buttons from vol mute channel up, the input button needs to be where the sleep or prev button is. Every person in the world changes the input device to their TV more than just about anything else they do. Any time they use a different piece of equipment from the DVD to cale/satelite to video games they change the input. That button needs to be accessible without rearranging your hand.
In closing: I like this remote. It will do exactly what I bought it for - relieve me of the stack of remotes that I use when I watch television via my cable box, or DVD's, both while listening to the sound through my home theater. It is not a complicated set up, and I don't utilize all of the functions of my units or remotes. I use the basic functions only. My only real dislike is that you have to wake the remote up by pushing a button before you do anything. I don't see a need for the remote to wake up when hard buttons are pressed, but that is just my opinion. If I had to buy this remote again I would either get this one or another made by OneForAll.
I am going to use a paint pen and home made stencil to label the ABC buttons onto the body of my remote for use with the cable box, and might find a way to label other functions I programmed onto the remote so that I don't forget them. Any suggestions on how to do this would be greatly appreciated, as there is limited space to work with. Perhaps clear stickers would work. But they would have to be small and labeled.
