• Distributes audio to multiple locations from the same audio source • Uses industry standard CAT-5e cable to extend the audio • Rack mountable

• Both digital and analog inputs are format converted and pixel re-scaled. A large range of formats and resolutions will easily match the native resolution of your display to ensure highest picture quality. • DVI/HDCP/HDMI compliant input: Operates at video bandwidths of up to 165Mhz (Up to WUXGA @60Hz) • Supports digital HD output up to 1080p • Integrated 8-bit triple-ADC/PLL. • Integrated DVI/HDCP/HDMI compliant receiver. • Dual high quality scaling engines. • Dual 3-D motion adaptive de-interlacers with smooth low-angle edge. • Automatic 3:2 pull-down & 2:2 pull-down detection and recovery. • High performance frame rate conversion engine. • The Proprietary Advanced Color Engine technology gives: Brilliant and fresh color, Intensified contrast and details, Vivid skin tone, Sharp edge,... Less

Save money time and space with our plenum-rated audio amplifier. Laboratory tested and verified this unit can be installed directly in a plenum air space without enclosing it in a separate plenum-safe box. Its minimal size and weight allow for easy installation virtually anywhere. With a simple design and 40 Watts RMS at 4 Ohms output this stereo amplifier provides excellent sound reinforcement in classrooms conference rooms training centers offices restaurants and other settings. Dual inputs (RCA stereo audio 3.5mm stereo audio) have separate gain control ensuring the appropriate volume for each connected device. The amplifier employs a quick-connect phoenix connector for power and speakers and also has short circuit protection. Input: Two RCA Female One 3.5mm Stereo FemaleOutput: Four... Less

Crown Audio CTs-600 CTs Series 2-Channel 300 Watt per Channel Amplifier - Power Cable - Owner's Manual - Crown Audio 3 Years Warranty.The Crown Audio CTs-600 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters and an advanced level of well designed overload protection circuitry.

• Distributes audio to multiple locations from the same audio source • Uses industry standard CAT-5e cable to extend the audio • Rack mountable

Car Alarms CD & MP3 Players Component Speakers DVD Players EQ & Sound Processors Indash DVD Players Marine Audio Mono Amplifiers Multi Channel Amplifiers Navigation Sound Deadning Speakers Subwoofer Enclosures Subwoofers Others RE AUDIO DTS 1500.1 2000W, Monoblock Class D DTS Series Car Amplifier Each purchase = 1 Brand New Amplifier! DTS Series Monoblock Class D Car Amplifier RMS Power Rating (14.4V)): 4 ohm: 410 watts x 1 chan. 2 ohm: 700 watts x 1 chan. 1 ohm: 1000 watts x 1 chan. Dynamic power output: 2000 watts x 1 chan. Pulse Width Modulated MOSFET power supply Wired remote bass level control included LED power (green) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) Bridgeable with multi link technology (MLT) Mono channel operation

Like all Crown amps the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight rock-solid low end with smooth detailed highs and a well-defined midrange. In short the most accurate reproduction of an audio signal youíve ever heard. And because we put the quality of sound above all else a Crown is the most coveted amplifier in the business.

The ELK-800 is a great compact public address audio amplifier. It may be connected to a telephone system paging output, a microphone, or even an ordinary single line phone set (see Basic PA system below). The audio source is amplified up to 10 watts, adjustable from an on-board volume control. Remotely installed, it saves money by requiring only 22 - 24 gauge telco or alarm type wire. It operates on 12 to 24 volts AC or DC and can also drive multiple speakers. Features 10 Watt Amplifier Expanded Telephone System Paging Does Not Require 25 or 70V Line Transformers Multiple Speaker Hookups Requires only 22-24 gauge telco wire Built-in Volume Control Compact Size Surface Mount ABS Enclosure with Snap-On Cover Lifetime Limited... Less

19in 3u Rugged Professional Power Amplifier Power Rating: 8 Ohms: 980 Watts X 2 Chan.4 Ohms: 1500 Watts X 2 Chan.2 Ohms: 2150 Watts X 2 Chan.Bridged @ 8 Ohms: 3100 Watts X 1 Chan.Bridged @ 4 Ohms: 4250 Watts X 1 Chan. Dc Output Protection, Overload Protection, Short Circuit Protection, On & Off ProtectionSub Woofer CrossoverLed Mode IndicatorContract or Smart Feature (switch On Rear Panel To Disable Front Volume Controls)Turn-on Thump ProtectionDual 2 Speed Fans & HeatsinkTotal Harmonic Distortion (thd): Less Than 0.3% (20hz-20khz, @ 8 Ohms)Input Sensitivity & Impedance: 1.0v Rms (0 Dbv) (@ 8 Ohms)Frequency Response: 5-85,000 HzSignal-to-noise Ratio: 100 DbDamping Factor: 400Dimensions: 15-15/16ind X 19inw X 5-1/4inh1-year Manufacturer's Warranty

The D5XH 4 Source, 6 Zone Digital Audio Expansion Router, when used with the D5RH Digital Audio Router, provides the ability to listen to 4 different audio sources in up to 28 separate areas of the home for total flexibility and convenience. No need to have multiple audio systems in different areas, just select a source from one of Xantech's premium in-wall keypad, sit back and enjoy!General Information- Manufacturer- Xantech Corporation: General Information- Manufacturer Part Number-D5XH:Genera l Information- Manufacturer Website Address-xantech:Ge neral Information- Brand Name-Xantech:Gener al Information- Product Model-D5XH:General Information- Product Name-Audio Distribution Amplifier: General Information- Product Type-Audio Distribution Amplifier: Miscellaneous- Package... Less

Roswell Wake Air 500.1 Amp Rma Amplifier . The RMA 500.1 is a true power house mono amplifier that packs the hardest punch in the smallest package in its class with true 500 watt RMS power. Fine tuning adjustment can be made with the supplied remote gain control. Features High efficiency Class G/H Internal fan Reversed heat sinks to dissipate heat Fully marinized with water repellant and anti corrosion spray on circuit board Remote GAIN control (supplied) Advanced Diagnostic System Small installation foot print Specifications POWER OUTPUT 4? - 312 Watts X 1 14.4V POWER OUTPUT 4? - 509 Watts X 1 14.4V TOTAL HARMONIC DISTORTION - 0.05% FREQUENCY RANGE - 20Hz-200Hz CROSS OVER RANGE - 30Hz-2000Hz BASS BOOST - 0-15Db 30Hz-125Hz S/N RATIO (a WTG) REF 4? - >82Db OVERALL DIMENSION - 11.7... Less

The CA12 professional power amplifier is designed to achieve unsurpassed sonic performance & long-term reliability-- even when operating under extreme stress--in touring or fixed installation applications. The CAT series provides tremendous value in proven amplifier technology.CAs form the backbone of discriminating rental systems & high-power club installations worldwide. Auditoriums, churches, regional tour sound companies & mobile DJs are all ideal candidates for the CA Series' combination of value & sonic quality. The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities & exceptional low-end response make this amplifier an ideal choice for installations & touring applications that demand the... Less

Crown Audio 1160A 1-Input/One 160W Power Amplifier - Power Cord - Rack-Mounting Kit - Non-Touch Cover for Output Connectors - Crown Audio 3 Years Warranty.The 1160A from Crown Audio is a 1-channel, 160W amplifier designed for commercial and industrial audio and is part of Crown's Commercial Audio Series of products. This amplifier is suitable for use in schools, hospitals, offices, prisons, retail spaces and other similar venues for applications such as background music and announcements. It features balanced phoenix-type inputs and touch-proof screw-terminal speaker outputs. It also has a protection system for output current limiting and DC and thermal protection.

• Distributes audio to multiple locations from the same audio source • Uses industry standard CAT-5e cables to extend audio • Rack mountable

This Marine Amplifier features Advanced Thermal Rollback Protection, so it automatically rolls back peak voltage under tough conditions to protect your amp while continuing to play at a safe level. This amp is compatible with almost any system thanks to the Differential- Balanced Inputs that isolate the signals ground from the chassis ground to reduce noise. Other features include Ultra-Compact Footprint, NexD Switching Technology, Studio-Grade Signal Processing, Active 2-Way Crossover, Removable Control Cover, Remote Level Control Port, and ABYC Compliant Compression Terminals. Continuously variable cutoff frequency selection from 50Hz-500Hz @ 12 db/Oct. Rated power 14.4V stereo: 75W x 6 @ 4 ohm, 100W x 6 @ 2 ohm; bridged: 150W x 3 @ 8 ohm, 200W x 6 @ 4 ohm.10.2"L x 7.1"W x 2.1"H.

Give your audio the power it so richly deserves with the Peachtree220 2-channel power amplifier. A new breed of Class D amplifier delivers 220W of power to your speakers, letting you enjoy impressive detail and musicality, bringing out the full potential of your speakers for ear-pleasing highs and room-shaking bass. Connect it to your Peachtree novaPre, or other receiver or pre-amplifier, and hear the difference great power makes.

Like all Crown amps the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight rock-solid low end with smooth detailed highs and a well-defined midrange. In short the most accurate reproduction of an audio signal youíve ever heard. And because we put the quality of sound above all else a Crown is the most coveted amplifier in the business.

Slim Series Monoblock Car Audio Amplifier Model: XM-1S RMS Power Output: 4 ohms: 290 watts x 1 channels 2 ohms: 500 watts x 1 channels Fuse rating: 30A x 2 Subsonic Filter: 15 dB Frequency Response: 5 Hz - 300 Hz Low-pass Crossover: 50 Hz - 300 Hz Variable bass boost (0-10 dB at 40 Hz) CEA-2006 compliant Class-D amplifier design Preamp inputs and outputs MOSFET outputs and power supply Speaker-level inputs with high-level sensing turn-on Dimensions: 8-7/8" L x 7-3/4" W x 1-3/4" H

6-channel Class D M-series Marine AmplifierRms Power Rating @ 14.4v: 4 Ohms: 75 Watts X 6 Chan.2 Ohms: 100 Watts X 6 Chan.Bridged, 8 Ohms: 150 Watts X 3 Chan.Bridged, 4 Ohms: 200 Watts X 3 Chan.Rms Power Rating @ 12.5v: 4 Ohms: 60 Watts X 6 Chan.2 Ohms: 90 Watts X 6 Chan.Bridged, 8 Ohms: 120 Watts X 3 Chan.Bridged, 4 Ohms: 180 Watts X 3 Chan.Unregulated Mosfet Switching Type Power SupplyNexd Class D Technology Reduces Distortion And Delivers Superior EfficiencyFully Variable 12db/octave Filters With Filter Frequency Selection ControlsTwo Stereo Pairs (rca-type Jacks)3/4/5/6 Channel OperationSpeaker- level (high-level) InputsAdvanced Rollback Protection Circuitry For Advanced Thermal And Low-impedance ProtectionOptiona l Bass Knob: HdrlcDifferential Inputs Reduce Unwanted NoiseSpeaker... Less

20-ft 4 gauge power wire 5-ft 4 gauge ground wire 16-ft 16 gauge remote turn-on wire 10-ft 3/8" splitloom tubing FHAGU-4 fuse holder 60 amp AGU fuse CS-1 7 one 7-ft RCA interconnect Two 4 gauge 5/16" ring terminals Five 6" wire ties Two 4 gauge spade terminals 16 gauge spade terminal 16 gauge butt terminal BT-48P battery terminal

8 Channel Power Amplifier - 75 Watts Per Channel at 8 Ohms The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements - reliably and within budget. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series.

This Marine Amplifier features Advanced Thermal Rollback Protection, so it automatically rolls back peak voltage under tough conditions to protect your amp while continuing to play at a safe level. This amp is compatible with almost any system thanks to the Differential- Balanced Inputs that isolate the signals ground from the chassis ground to reduce noise. Other features include Ultra-Compact Footprint, NexD Switching Technology, Studio-Grade Signal Processing, Active 2-Way Crossover, Removable Control Cover, Remote Level Control Port, and ABYC Compliant Compression Terminals. Continuously variable cutoff frequency selection from 50Hz-500Hz @ 12 db/Oct. Rated power 14.4V stereo: 75W x 2 @ 4 ohm, 100W x 2 @ 2 ohm; bridged: 150W x 1 @ 8 ohm, 200W x 1 @ 4 ohm.6.9"L x 7.1"W x 2.1"H.

This Marine Amplifier features Advanced Thermal Rollback Protection, so it automatically rolls back peak voltage under tough conditions to protect your amp while continuing to play at a safe level. This amp is compatible with almost any system thanks to the Differential- Balanced Inputs that isolate the signals ground from the chassis ground to reduce noise. Other features include Ultra-Compact Footprint, NexD Switching Technology, Studio-Grade Signal Processing, Active 2-Way Crossover, Removable Control Cover, Remote Level Control Port, and ABYC Compliant Compression Terminals. Continuously variable cutoff frequency selection from 50Hz-500Hz @ 12 db/Oct. Rated power 14.4V stereo: 75W x 6 @ 4 ohm, 100W x 6 @ 2 ohm; bridged: 150W x 3 @ 8 ohm, 200W x 6 @ 4 ohm.10.2"L x 7.1"W x 2.1"H.

NEW M-F 9to5 Our Business hours: Monday to Friday 9am to 5pm Pacific Time. We are closed on Saturdays and Sundays. Enlight_5210662_r ail_handle_kit Click on picture to supersize Please check the dimension on the picture to make sure it is the right size for your application. Enlight part# 5210662 5U Rackmount Case Rail Handle Kit for Enlight EN-8950 server case. May fit other rackmount server chassis as well. Left bracket's part number is 3224302 Right bracket's part number is 3224303 BRAND NEW

Brand Name= RE AUDIO Part Number = DTS-1500.1 Condition = New in Box UPC = 611892980594 low level input sensitivity: 200mv-8v 1_ stable class d monoblock 1,000w dynamic power 1,000w x 1 @ 1_ rms 700w x 1 @ 2_ rms 410w x 1 @ 4_ rms signal-to-noise ratio: 80 db freq resp: 20 hz-500 hz

3-channel Class D M-series Marine AmplifierRms Power Rating @ 14.4v: 4 Ohms: 75 Watts X 2 Chan. + 180 Watts X 1 Chan.2 Ohms: 100 Watts X 2 Chan. + 300 Watts X 1 Chan.Bridged, 8 Ohms: 150 Watts X 1 Chan.Bridged, 4 Ohms: 200 Watts X 1 Chan.Rms Power Rating @ 12.5v: 4 Ohms: 60 Watts X 2 Chan. + 180 Watts X 1 Chan.2 Ohms: 90 Watts X 2 Chan. + 300 Watts X 1 Chan.Bridged, 8 Ohms: 120 Watts X 1 Chan.Bridged, 4 Ohms: 180 Watts X 1 Chan.Unregulated Mosfet Switching Type Power SupplyNexd Class D Technology Reduces Distortion And Delivers Superior EfficiencyJl Audio Wired Bass Remote Level Control Is Sold SeparatelyFully Variable 12db/octave Filters With Filter Frequency Selection ControlsTwo Stereo Pairs (rca-type Jacks)2-channel/mo no OperationSpeaker- level (high-level) InputsPass- through Preamp... Less

Digital Designs C2B Car Audio Amplifier As new condition -used for one show and then my friend reconfirgured his car audio system. Amplifier is approx. 6 months old total and has been boxed most of that time. The C2b is a 400 watt RMS (960 Watts max) 2 channel amp designed to drive both mid/high sections or it can bridged into a mono amp for driving sub systems. The C2b features variable high and low pass filters, a variable bass boost and RCA pass through jacks to optimize any application. Oth

M Series 2-channel Class D Full-range AmplifierRms Power Rating (14.4v): 4 Ohms: 75 Watts X 2 Chan.2 Ohms: 100 Watts X 2 Chan.Bridged, 8 Ohms: 150 Watts X 1 Chan.Bridged, 4 Ohms: 200 Watts X 1 Chan.Rms Power Rating (12.5v): 4 Ohms: 60 Watts X 2 Chan.2 Ohms: 90 Watts X 2 Chan.Bridged, 8 Ohms: 120 Watts X 1 Chan.Bridged, 4 Ohms: 180 Watts X 1 Chan.Unregulated Mosfet Switching Type Power SupplyNexd Ultra-high Speed Class D TopologyWired Jl Audio Hd-rlc Remote Level Control Sold SeparatelyLed Power (green) And Protect (red/yellow) IndicatorsIndepen dent Input Sensitivity ControlsState-of-t he-art Microelectronic Components2/1 Channel OperationAdvanced Thermal Rollback System Completely Eliminates Annoying Thermal Shut-down EventsStudio- grade Signal Processing With Fully Variable Crossover... Less

New 1000 Watt Dual 10" Car Audio Subwoofers System w/Amplifier New Acoustic Audio 1000 Watt Dual 10" Loaded Subwoofer Box Enclosure with 1000 Watt 2-Channel Amplifier and Wiring Kit Dual 10" Loaded Subwoofer Enclosure: Power Handling Capabilities: 500 Watts RMS/1000 Watts Max Power Black Industrial Aviation Grade Carpet MDF Construction Quick Lock and Release Speaker Terminals Impedance: 4 Ohm Dimensions: (H x W x D): 22.5" x 16.25" x 11.75" High Performance 2-Channel Amplifier: 1000 Watts Max Output Power 250 Watts RMS x 2 Channels @ 4 Ohm Variable Bass Boost: 0-12dB @ 45 Hz Full MOSFET Circuitry Power/Protection LEDs Thermal/Short/Ove rload Protection Circuitry RCA Line Input High Level Input Adjustable Input Sensitivity (Gain) Selectable HP/FULL/LP Crossover Variable LP Crossover:... Less

Changers Crossovers Equalizers Extended Warranty Head Units Marine Components Multimedia Systems Radar Detectors Gorilla Series Class A/B 2-Channel Car Amplifier RMS Power Rating: 4 ohms: 220 watts x 2 chan. 2 ohms: 280 watts x 2 chan. Bridged 4 ohm: 560 watts x 1 chan. Max power output: 1250 Watts Regulated MOSFET PMW power supply Bass Remote Details (Wired remote bass level control included) All connections on the front side for easy installation LED power indicators Bass Boost (0-12 dB bass boost at 45 Hz) 2/1 channel operation Bridged Synchronization (Strap amps together to double your power!) Preamp RCA outputs 3-Way system protection circuitry (thermal, overload, and short protection) Brilliant silver texture coat finish Heavy duty die cast aluminum alloy heatsink for extreme heat... Less