Amplifiers and Preamps

Without Remote Control

This amp is most likely the best upgrade value in the world of home theater, Onkyos M-282 is ideal for adding to THX Surround EX or other multi-room/multi- channel systems. Onkyos exclusive WRAT technology helps maximize signal accuracy.

Sold Individually... Fully configurable 12-channel amplifier 30 watts into 8 ohms and 37 watts into 4 ohms (RMS per channel all channels driven) Bridgeable channels have adjacent channels are bridgeable to 80 watts RMS into 8 ohms (all channels driven) Bus inputs have 1 input signal bussed to all 12 channels BusMatrixª allows 4 options: left bus right bus left & right bus (mono) or the dedicated input for each channel Level controls have Independent installer- adjustable level controls for each channel Turn-on modes have music sense voltage trigger (input accepts 3-30V AC/DC) and manual Speaker wire terminals have gold-plated 5-way binding posts 12-volt control out/3.5mm mini jack for system expansion/automat ion Cascade audio outputs via RCA jacks Two year limited warranty Overall... Less

SOLD INDIVIDAULLY... POWER Fully Discrete High-Current Stereo Amplifier 2 X 45 Watts RMS/Channel Into 8 Ohms .05% THD (Both Channels Driven) 2 X 70 Watts RMS/Channel Into 4 Ohms .08% THD (Both Channels Driven) Stable Into Low-Impedance Loads (2.66 Ohms) PROTECTION DC Short-Circuit and Overload Protection with Automatic Reset INPUTS/OUTPUTS Gold-Plated RCA Audio Input Jacks Gold-Plated RCA Cascade Output Jacks For Signal Routing To Other Amplifiers Gold-Plated Five-Way Binding Posts FEATURES Independent Installer- Adjustable Level Controls Three Turn-On Modes: Music Sense Voltage Trigger (Accepts 3-30V AC/DC) And Manual Mode. 12V DC Control Output (3.5 Mm Mini Jack) Removable Two-Wire IEC Line Cord SPECIFICATIONS Power Requirement: Standard Version 110V 60Hz; Export Version 220V 50Hz Rated... Less

200 watts X 7 channels at 8Ω (20Hz to 20 kHz) at .09% Total Harmonic Distortion Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound. Class AB Mosfet Output stage delivers efficient linear power. Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier. Differential input stage with a current source load assures DC stability and wide bandwidth linearity. Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound. Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control. Capability to operate at full power with a square wave input signal. Individual External Fuse Protection... Less

Pa Amplifier, Material Metal/plastic, Length 10 3/4 In, Width 9 1/2 In, Height 3 1/2 In, Output Watts 30, Output 25/70v, Inputs 2 Mics, Auxuliary, And 1 Telephone, Includes Music On Hold Feature With Separate Level Control, Standards Ul/ulc

SOLD INDIVIDUALLY... POWER Fully Discrete High-Current Stereo Amplifier 2 X 75 Watts RMS/Channel Into 8 Ohms .05% THD (Both Channels Driven) 2 X 120 Watts RMS/Channel Into 4 Ohms .08% THD (Both Channels Driven) Stable Into Low-Impedance Loads (2.66 Ohms) PROTECTION DC Short-Circuit and Overload Protection with Automatic Reset INPUTS/OUTPUTS Gold-Plated RCA Audio Input Jacks Gold-Plated RCA Cascade Output Jacks For Signal Routing To Other Amplifiers Gold-Plated Five-Way Binding Posts FEATURES Fully Discrete High-current Stereo Amplifier 2 X 75W RMS/channel Into 8 Ohms .05% THD (both Channels Driven) 2 X 120W RMS/channel Into 4 Ohms .08% THD (both Channels Driven) Stable Into Low-impedance Loads (2.66 Ohms) DC Short-circuit And Overload Protection With Automatic Reset Gold-plated RCA Audio... Less

An able successor to the award-winning Niles SI-1200 amplifier, the Niles SI-1230 12-Channel Amplifier offers you all the perks of a high-power audio performance, without the unwanted sound bleeds. Featuring unique, innovative technology which reduces noise ratio, cross talk and distortion, this Niles Amplifier allows you precise, high definition audio. Whats more, this 12-channel amplifier also integrates a very user-friendly LED status display on the front panel, which keeps you tuned in to any problems which require your attention, and possibly, service. With its sleek design, fully-detachable cord line and easy installation, the Niles SI-1230 12-Channel Amplifier is sure to fit in seamlessly to your everyday entertainment lifestyle.

Speco PBM30 30W Contractor Series PA Amplifier UL Listed $ 147

100 watts x 2 channels into 8 ohms / Input level adjustment / Preamp-level input-output loop / Auto power on-off / Pass-through

The BB1265 is a multi-channel amplifier that has been designed to meet the needs of the most demanding home theater and multiroom applications. All of the custom friendly features of our stereo amplifiers are included. In addition, the models feature independent level controls for each channel for maximum control. Adjoining channels are bridged for extra power at the flip of a switch to give you the extra output you need. Each channel has its own protection circuitry, shutting down only the troubled area when needed for system safety.

Designed to drive multiple pairs of speakers connected in parallel: Stable into low-impedance loads (2.66 ohms) Three turn-on modes: music sense, voltage trigger and manual 5-way binding posts

Building on the award-winning performance of the Niles SI-1200, the new Niles SI1230 offers custom installers more power, more flexibility and an easier installation. Unique BusMatrix selector allows each channel to select from 4 options: left bus, right bus, left plus right bus (mono), or the channelâs dedicated input. Three turn-on modes: music sense, voltage trigger and manual. Independent level controls for each channel. Chassis Isolation Circuit eliminates Ground Loops 12-volt control out Removable 2-wire line cord

SpeakerCraft's BB2125 is a two-channel amplifiers that utilize discrete high current designs. The high current design makes them ideal for installations that require multiple speakers to be connected to one amplifier. Custom friendly features include multiple turn-on modes, front mounted independent level controls and pass through outputs.