Meade Telescopes 14 in LX200ACF Advanced Coma Free OTA Telescope 14106000 Model: 1410-60-00. Meade 14 in LX200ACF Advanced Coma Free OTA Telescope

Piggyback Bracket for 14" LX200 or LX200GPS Piggyback Photography is one of the most popular, and easiest, ways to get started in Astrophotography. Simply by attaching your 35mm camera, with its own 35mm-to-250mm lens, atop any Meade LX10, LX90, or LX200GPS in the equatorial mode, and guiding the camera through the main telescope, wide-field photos of the Milky Way of remarkable detail and clarity can be taken. Piggyback Brackets are available for Meade 7", 8", 10", 12", 14", and 16" LX-Series telescopes.

Meade Model 1220 Field De-rotater for Meade LX200GPS Telescopes Meade LX200GPS telescopes may be operated in the altazimuth mode (i.e., without polar alignment) for all visual applications and for photographic or CCD imaging exposures of up to about five minutes duration. Most LX200GPS owners use their telescope in the altazimuth mode the great majority ofthe time. During longer photo or CCD exposures in the altazimuth mode, however, an effect called field rotation becomes evident. Simply put, even if the telescope is perfectly guided on a central star during along exposure, stars at the edge of the field appear to rotate about the field center during the exposure. As a result, stars away from the field center appearas small concentric arcs on the film, rather than starpoints. This... Less

The ultra-heavy duty equatorial Ultrawedge is designed extra rigidity needed to hold the 7" through 14" Meade LX200 and 10", 12" and even 14" RCX 400 scopes in a polar alignment for long exposure astrophotography. The Ultrawedge comes with all necessary mounting hardware to mount it on either the LX200 variable height tripod or the RCX 400 tripod. It can be used over a latitude range of 25 degrees to 65 degrees. It comes with large 3" diameter no-tool altitude and azimuth adjustment knobs to make polar alignment easy. A supplied compass fits into the Ultrawedge to make the initial north alignment easier. The die cast vertical side pieces that hold the tilt plate are reinforced by two steel bars bolted from side to side at the rear of the wedge. These bars also improve the Ultrawedge's... Less

Three Differing Weights.This Tube Balance Weight System permits the balancing of heavy or long-lever-arm accessories attached to the eyepiece-end of the 14" Schmidt- Cassegrain telescope. Each weight assembly attaches to factory-threaded holes provided on the underside of every Meade 8", 10", 12", 14", or 16" SCT or 7" Maksutov. Three differing weights are supplied with each unit, permitting considerable variation in the total weight available for balancing.

The Ultrawedge is a more rigid wedge which features precision, ultra-smooth adjustments which now make critical alignments on the celestial pole easier than ever before.

Piggyback Bracket for 10" SCT's Piggyback Photography is one of the most popular, and easiest, ways to get started in Astrophotography. Simply by attaching your 35mm camera, with its own 35mm-to-250mm lens, atop any Meade LX10, LX90, or LX200GPS in the equatorial mode, and guiding the camera through the main telescope, wide-field photos of the Milky Way of remarkable detail and clarity can be taken. Piggyback Brackets are available for Meade 7", 8", 10", 12", 14", and 16" LX-Series telescopes.

Piggyback Bracket for 12" SCT's Piggyback Photography is one of the most popular, and easiest, ways to get started in Astrophotography. Simply by attaching your 35mm camera, with its own 35mm-to-250mm lens, atop any Meade LX10, LX90, or LX200GPS in the equatorial mode, and guiding the camera through the main telescope, wide-field photos of the Milky Way of remarkable detail and clarity can be taken. Piggyback Brackets are available for Meade 7", 8", 10", 12", 14", and 16" LX-Series telescopes.

Aperture: 14-Inch. Focal Length: 3556mm. Focal Ratio: f/10. UHTC coatings, Giant Field Tripod, 1.25-Inch Diagonal Prism, 26mm Series 4000 Super Plössl eyepiece. The most widely used research quality telescope now features the most advanced optical system. Meade’s LX200-ACF brings Advanced Coma-Free (ACF) optics within reach of aspiring astronomers everywhere. Nearly every observatory reflector in the world uses an aplanatic (coma-free) optical system like the Ritchey-Chrétien (RC), including NASA’s Hubble Space Telescope. Now you can own similar optics to what the professionals use. The LX200-ACF includes all the field-proven features of the LX200 including GPS, Primary Mirror Lock, Oversized Primary Mirror, SmartDrive; Smart Mount, AutoStar II and more. The new LX200-ACF. It’s the... Less

Three Differing Weights.This Tube Balance Weight System permits the balancing of heavy or long-lever-arm accessories attached to the eyepiece-end of the 16" Schmidt- Cassegrain telescope. Each weight assembly attaches to factory-threaded holes provided on the underside of every Meade 8", 10", 12", 14", or 16" SCT or 7" Maksutov. Three differing weights are supplied with each unit, permitting considerable variation in the total weight available for balancing.

Meade Dovetail Plate is designed for 14" Schmidt- Cassegrain and Advanced Coma-Free telescopes. It is a part of the Series 5000 Auxiliary Equipment System. Equip your Meade LX90, LX200, or other SCT or ACF telescope with the best and maximize its performance today.This dovetail plate attaches via existing bolts to the top or bottom as required of your Meade 14" Schmidt- Cassegrain or Advanced Coma-Free telescope, allowing use of the other Auxiliary Equipment System components (sold separately). Includes two radius blocks precision manufactured to the curvature of the optical tube and stainless steel mounting hardware. Features precision milled aluminum construction, with all joining surfaces chamfered or filleted to eliminate all sharp corners and edges.

For 14-Inch LX200. Take your camera for a ride. Piggyback photography is a popular and easy way to get started in astrophotography. This bracket lets you attach your camera (with lens) atop any Meade LX90 or LX200. Polar align your scope in equatorial mode, use your scope to guide, and take beautiful wide-field photos of the Milky Way and other regions.

For 7-Inch, 8-Inch, 10-Inch, 12-Inch and 14-Inch LX200 & LX400/MAX models - Including 16-Inch LX400/MAX. The equatorial wedge alternative. If you want to do long exposures (over 5 minutes) in Alt/Az mode without a wedge, you can correct for field rotation (which results from the scope not rotating on the same axis that the earth does) with Meade’s Field De-Rotator. Attaches to the rear cell of your scope to precisely counter the effects of Alt/Az-induced field rotation.

Visit our eBay Store:Helix Camera Meade #62 T-Adapter for all LT, LS, LX90, LX200 MAX Telescopes for Prime Focus Astrophotography For all Meade SCT Series models,LS, LX90 and LX200 models including ACF and older Schmidt- Cassagrain designs which have a standard Schmit- Cassegrain type rear cell thread Includes:Adapter as shown The T-Adapter is the basic means of prime-focus photography through all Meade SCT Series models. Thread the T-Adapter on to the rear cell of the telescope, followed by a T-

Aperture: 14-Inch. Focal Length: 3556mm. Focal Ratio: f/10.

Ultra-stable wedge for 8-Inch, 10-Inch, 12-Inch, & 14-Inch LX200 Telescopes. A long exposure necessity. An Equatorial Wedge is for exposures longer than about 5 minutes (under 5 minutes, a wedge is not necessary). A wedge permits precise polar alignment of your telescope in equatorial mode (compared to Alt/Az mode). This eliminates field rotation in long-exposure photographs by allowing you to align the telescope’s axis of rotation with the Earth’s axis of rotation. Die cast aluminum wedges include fine adjusters, no-tool knobs, and a compass for faster aligning on the pole. Choose the appropriate 8-Inch EQ Wedge or our extra heavy duty Ultra-Wedge.

Meade Telescopes 8in LX200-ACF OTA Telescope w/UHTC 08106000 Model: 0810-60-00. Meade 8in LX200-ACF OTA Telescope w/UHTC 0810-60-00

Meade 8 inch Schmidt- Cassegrain Telescope - Series 4000 26mm Eyepiece - 8x50 Viewfinder - 1.25" Diagonal Prism - Counterweight - Software DVD - Meade 1 Year Limited Warranty.The Meade 8" SC Schmidt- Cassegrain includes (203mm) f/10 optical tube with industry leading Ultra-High Transmission Coatings (UHTC) achieving 15% better light transmission than standard coatings, thermally stable oversized primary mirror, and water-white glass corrector plate unlike the inferior plate glass used by some other telescope manufacturers. The result is a spectacular viewing experience not available on competitors' SC telescopes.The LX80 Multi-Mount operates in three modes: German equatorial, single OTA alt-az and dual OTA alt-az. Setting up in any mode is quick and easy, while tapered roller bearings in... Less

Meade #547 compatible Power Adapter & # 607 compatible 25' cord for Meade LX 200 series Telescopes This power adapter allows you to use AC power AND battery power via the included 25 ft power cord from your car. Universal Power Input: 100V-240V 50/60Hz Meade #547 compatible output 12V 2000mA (2A) Power Adaptor This is a a top quality switching power which mean the adapter is compact in size and light weight. This power supply has builtin electronic circuit for short and over load protection. The power adapter has red LED light for DC output. This power adapters and the 25 ft power cord allows powering your telescopes 25 ft from the power source (AC wall socket or cigarette lighter socket from your car). You can put you telescope far away from your house. Be aware other power adapter... Less

Meade Telescopes 10in LX200-ACF OTA Telescope w/UHTC 10106000 Model: 1010-60-00. Meade 10in LX200-ACF OTA Telescope w/UHTC 1010-60-00

Store Home Brands Departments Categories About Us Policies Contact Us Series Name: Meade Piggyback Brackets for LX-Series Telescopes This listing is for the following option: Meade Piggyback Bracket for 7 inch LX200 or LX200GPS and all 8 inch SCT 07394 This Stock Photo may not match the actual item listed.This listing is for Model# 07394 Authorized Dealer Product Code: ME-TA-Pg-Brackets- 07394 Model Number: 07394 Die-cast Meade Piggyback Brackets for LX-Series Telescopes allow your 35mm camera t

focuser with adapters for the rear of any Meade LX200-ACF or LS model telescope cord to plug into the focuser port of the telescope Full one year Meade factory limited warranty This high precision, ultra smooth focuser allows you to obtain an extremely accurate image focus. Perfect for astrophotography or during high power planetary observation. Focus is controlled through the existing Autostar II or Autostar III handbox of the telescope. This very high quality accessory securely mounts to a thread-on type adapter (included) to the rear of your telescope. The diagonal or camera (not included) then inserts into the microfocuser which has approximately 1/2 inch of travel. Coarse focus is achieved conventionally through the telescopes focus knob. The Microfocuser is then used to achieve a... Less

Meade Telescopes 16in LX200-ACF Advanced Coma-Free Telescope w/AZ Pier w/ Uhtc Model: 1610-60-02AZ. Meade 16in LX200-ACF Advanced Coma-Free Telescope w/AZ Pier w/ UHTC 1610-60-02AZ

For all 14-Inch LX200 models.

Meade Telescopes 12in LX200-ACF OTA Telescope w/UHTC 12106000 Model: 1210-60-00. Meade 12in LX200-ACF OTA Telescope w/UHTC 1210-60-00

Meade Telescopes 16in LX200-ACF OTA Telescope w/UHTC 16106000 Model: 1610-60-00. Meade 16in LX200-ACF OTA Telescope w/UHTC 1610-60-00

Meade Telescopes 16 in LX200ACF Advanced Coma Free Telescope With Uhtc 16106002 Model: 1610-60-02. Meade 16 in LX200ACF Advanced Coma Free Telescope with UHTC

http://www. flyingbulldogs. com/ebay% 20images/cm.114-10 687.jpg

HOME PAYMENT SHIPPING RETURN POLICY Meade #607 12 volt DC Power Cord - 25 Feet Long 07043 Retail Price: 19.00 Product Description For field use of ETX 90/105/125AT, LX10, LX90, or LX200GPS telescopes up to 14" aperture from 12v DC automobile cigarette lighter plugs, use the #607 Power Cord. The 16" LX200GPS telescope operates from 18v DC and requires the #1812A Electronic DC Adapter. About In 2001 High Point Scientific opened as a small northeast telescope shop. Ten years and tens of thousands

For use with 191 lb, and 381 lb breaking strength half nets from JUGS. Every piece of pipe in a JUGS batting cage frame is made of industrial gauge galvanized steel, to give you years of trouble free use.Frame sets are available for all standard size JUGS Nets. Special order custom size frames are also available. Each frame set comes complete with uprights, crossbars, and ground sleeves. Complete instructions are included so you can set up your frame quickly and easily.The JUGS Company is the exclusive worldwide source for batting cage netting made from DuPont type 66-728 nylon - the most durable nylon in the world against all forces of nature including but not limited to: rain, snow, and ultraviolet rays.All JUGS Nets have a diamond mesh construction for better resistance to constant... Less