Photoelectric, Duct Smoke Detector, Universal, Depth 2 1/2 In, Height 5 In, Length 14 3/8 In, Ambient Temp Limits -4 To 158 F, Air Velocity 100 - 4000 Fpm, Alarm Aux Contact @ 250v 10a, Alarm Aux Contact @ 30vdc 10a, Alarm State Max 60ma @24vdc/ Max 130ma Rms @24vac/ Max 35ma Rms @120vac Ma, Humidity Range 0 To 95 % Rh, Standby State Max 25ma @24vdc/ Max 55ma Rms @24vac/ Max 20ma Rms @120vac Ma, Voltage 24vdc/ 24vac/ 120vac

Photoelectric smoke alarm with patented 3-position test switch. Applications include residential and commercial residential occupancies.

Duct Smoke Detector, Photoelectric, Finish Clear Plastic, Surface Mounting, Alarm Current 35 Ma, Standby Current 25 Ua, Depth 1 7/8 In, Height 5 7/16 In, Length 14 1/2 In, Ambient Temp Limits -20 To 158 F, Air Velocity 100 To 4000 Fpm, Humidity Range 20 To 95 % Rh, Standby State 25 Ma, Voltage 20 To 31 Vdc, 24v Dc, 24v Ac, 120v Ac, 220/240v Ac

Sensaphones Photoelectric Smoke Detector 120V Photoelectric Smoke Detector FGD-0049 Add a FGD-0049 photoelectric smoke detector with built-in relay to your Sensaphone Remote Monitor. Receive an instant alert in case of a fire. A hard wired 120V AC connection powers the Sensaphone Smoke Detector. This smoke detector has a built-in 90dB solid-state Piezo sounder for loud local alert when it senses smoke on the premises. The smoke detector can be mounted on a single-gang, double-gang, or four-inch square box. NOT Compatible with IMS System. Photoelectric Smoke Detector Specifications: 120 VAC input via permanent connection Two sets of dry alarm contacts (one form A, SPST; one form C, SPDT). Horn included. Tandem interconnect capability (maximum 20). Dimensions: 5.1" diameter x 2.5".

NEW FIREX 4618 SMOKE DETECTORS i4618 AC/DC LOT OF 12 PRODUCT FEATURES Ionization Sensing Technology Battery Backup (batteries included) Hush® Button Alarm Memory Indicator New 360 Mounting Plate with Tamper Resistance Front Load Battery Door Description The Kidde i4618 is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum... Less

The BRK SC9120B is a wire-in, 120V AC 60Hz single and/or multiple station smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101.

Signature Series Smoke Detector with Transmitter SC-SS_SDTRThe new 418MHz Signature Series uses radio frequency technology, allowing you freedom and flexibility with outstanding features and increased range of up to 2,000 feet. Quickly know when you have visitors, telephone calls or emergencies with the bright flashing strobe and distinctive LEDs.The Signature Series Smoke Detector with Transmitter transmits to the Sidekick II Receiver, which will flash when it has been activated. Includes one 3V lithium battery. Three and five year warranty.What else do I need to make this work?This product will only work with 418MHz products in the Silent Call Signature Series. In order to be notified, you will need to purchase a Silent Call Signature Series Receiver.

Portable Electronic Air Purifier - 275 CFM - 120V - Black Anyone who suffers from asthma, allergies and the irritation of dust, pollen or smoke will appreciate the benefits of cleaner air with this air purifier. This unit features two speeds for cleaning capabilities of 210-275 cubic feet per minute and is ideal for rooms up to 20' x 20' for four air changes per hour. The CFM of all our units were tested with the filters in place for a true reading. The fan operates at a decibel rate lower than the average conversation! The air is filtered through a permanent and washable Electronic Filter and a disposable odor absorbing Carbon After Filter. When cleaning the Electronic Filter, use a cell cleaning solution for best results. No Media filters to throw away, helping to eliminate the size... Less

Smoke Detector 120V w Battery Backup for Sensaphones Photoelectric Smoke Detector For Instant Telephonic Fire Alert Protect against fires in home or business. Get immediate notification if smoke is detected in your home or business. Add this photoelectric smoke detector with dry alarm contacts FGD-0049-B to your Sensaphone Monitor. Receive an instant alert in the event of a possible fire. If someone is on the premises, the 9 dB sounder will warn them of smoke where the smoke alarm is located. T

Suggested replacement C3000SCThe C13641 from KJB is a high quality CCD surveillance system camera virtually hidden inside a smoke detector. It features 1/4 inch BW CCD image sensor.The C13641 gives excellent picture quality with a high resolution of 420 TV lines and delivers clear images even in low light conditions with a minimum illumination of 0.05 Lux at F2.0. It has a signal to noise ratio of more than 48 dB and shows internal synchronization. The C13641 smoke detector has a choice of black and white or color video camera. If wired is not the solution you are looking for we also stock wireless versions of the same high quality item.

Brand BRK - Part No. 9120B - Voltage 120 - Battery Backup Yes - Battery Type 9 Volt Alkaline Included - Sensor Type Ionization Sensor for Fast Flaming Fires - Warranty 10 Years -

Photoelectric smoke alarm with patented 3-position test switch. Applications include residential and commercial residential occupancies.

This is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to eight times the normal pulse rate. After the photodiode confirms the presence of smoke for two consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

hpaki Store Product Description This photoelectric smoke detector is engineered for commercial, industrial, institutional and multi-family housing applications. Compatible with all 4-wire control panels, the 8000 Series features an exclusive three-position test switch that simulates .85% and 3.4% smoke conditions per NFPA 72 and UL 268 standards. Features:-Compatib le with all 4-wire control panels - Patented three-position test switch - Form A/Form C contacts for remote annunciationi - Nominal 2

713CS-W is a wall-mount, 120V AC photoelectric smoke detector and includes a 177 candela strobe, 90 db temporal 3 sounder, form-c contacts. Up to 6 can be interconnected.

Smoke Detector with Built-In Transmitter SC-SDTRFor use with Silent Call receiversVery simple to install and battery powered. If the smoke detector is "set off" the built-in transmitter sends a signal to any 318MHz Silent Call receiver. Sends a signal up to 500 feet away depending on the receiver used. Uses one 3V lithium battery (included).Three year warranty on smoke detector and five year warranty on Silent Call transmitter board.

NFPA 72, Table 7.2.2, states that ''detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.'' Smoke! in a can lets you meet this requirement without contaminating the detector, affecting its sensitivity, and increasing the risk of false alarms. Patented formula evaporates completely. Smoke! in a can is UL listed for all brands and models of photoelectric or ionization type smoke detectors. Its safe, non toxic formula contains no CFCs. After verifying smoke entry into the detector, you can walk away assured the Smoke! in a can will evaporate completely.

SquareTrade © AP6.0 New Page 1 THIS AUCTION IS FOR ONE EST GS 6391B-135 120VAC PHOTOELECTRIC HEAT SMOKE DETECTOR NIB! Manufacturer: Edwards / General Signal Our Part Number: EST6391B135 Catalog Number: 6391B-135 Ships Within: 12-24 Hours Condition: New in Box Combined Shipping: Yes Spec Sheet: N/A Retail Price: N/A Qty: 1 Made By Edwards / General Signal Photoelectric Smoke Detector 120VAC with 135°F Heat Sensor Click on thumbnails to view larger image! We gladly accept payments by Paypal , V

Every house, apartment, business has a smoke detector our Smoke detector camera systems is a perfect solution for video this one is bottom view camera non functioning smoke detector, we integrate the camera right into the bottom View Smoke detector so it is virtually hidden. Each bottom View Smoke detector system comes in black/white or color video cameras just choose the one that’s right for your application. Click Here to see more products KJB COVERT WIRELESS BOTTOM VIEW SMOKE DETECTOR CAMERA from KJB FEATURES: 92 degree field of view 3.6mm Lens 1/3 DSP Color CCD image Sensor, ¼ DSP B/W 380 lines of resolutions (color), 420 lines B/W 0.5 LUX Color, .05 B/W DC 12V power NTSC Audio is not available 5 3/4″ x 5 3/4″ x 1 5/8″ Transmitter / Receiver Specifications:... Less

Portable Media Air Purifier - 275 CFM - 120V - Black Anyone who suffers from asthma, allergies and the irritation of dust, pollen or smoke will appreciate the benefits of cleaner air with this air purifier. This unit features two speeds for cleaning capabilities of 210-275 cubic feet per minute and is ideal for rooms up to 20' x 20' for four air changes per hour. The CFM of all our units were tested with the filters in place for a true reading. The fan operates at a decibel rate lower than the average conversation! The air is filtered through a replaceable MERV 8 rated Media Filter and a disposable odor absorbing Carbon After Filter. The Media Filter is electrostatically charged and engineered for maximum dust holding capability, providing significant higher particulate efficiency than... Less

Photoelectric smoke alarm with patented 3-position test switch. Applications include residential and commercial residential occupancies.

Gentex Hard-wired for Wall Mount Smoke DetectorHard- wired for Wall MountThe 710CSW is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you will need an electrician to hook it up. One year warranty. The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photodiode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal... Less

770 SERIES PROJECTED BEAM SMOKE DETECTOR

713CS-C is a ceiling-mount, 120V AC photoelectric smoke detector and includes a 177 candela strobe, 90 db temporal 3 sounder, form-c contacts. Up to 6 can be interconnected.

The BRK 9120B is an AC Powered Smoke Alarm with battery back-up, silence, latching and Perfect Mount system

Fyrnetics Heat Detector 120V Direct Wire Battery Backup Fyrnetics Heat Detector Alarm by Kidde Kidde heat detectors respond to fire, not smoke. While smoke detectors get all the attention, heat alarms are another useful component of any modern fire detection system. Experts recommend heat detectors for places where regular smoke detectors can be fooled - in the kitchen, near a steamy bathroom or furnace room, and around kerosene heaters or fireplaces. Interconnectable ? Interconnects with up to 24 Kidde devices of which 18 can be initiating Test Button ? Tests unit?s electronic circuitry, horn and battery function 9V Battery Back Up ? Provides continuous protection even during power outages Red LED ? Flashes every 30-40 seconds to indicate proper operation Low Battery Indicator ?

7139CS-C is a ceiling-mount, 120V AC photoelectric smoke detector and includes a 177 candela strobe, 90 db temporal 3 sounder, form-c contacts. Up to 6 can be interconnected. Includes 9V battery backup.

Photoelectric smoke alarm with patented 3-position test switch. Applications include residential and commercial residential occupancies.

Gentex Hard-wired for Ceiling Mount Smoke DetectorHard- wired for Ceiling MountThe 710CSC is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up. One year warranty. The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photodiode confirms the presence of smoke for 2 consecutive pulses, it will produce the... Less

Portable Electronic Air Purifier - 275 CFM - 120V - White with Black Trim Anyone who suffers from asthma, allergies and the irritation of dust, pollen or smoke will appreciate the benefits of cleaner air with this air purifier. This unit features two speeds for cleaning capabilities of 210-275 cubic feet per minute and is ideal for rooms up to 20' x 20' for four air changes per hour. The CFM of all our units were tested with the filters in place for a true reading. The fan operates at a decibel rate lower than the average conversation! The air is filtered through a permanent and washable Electronic Filter and a disposable odor absorbing Carbon After Filter. When cleaning the Electronic Filter, use a cell cleaning solution for best results. No Media filters to throw away, helping to... Less