First Alert SC9120B Smoke / CO Detector with Battery Backup & Strobe SMK_CO-KIT1This package features the SC9120B Smoke/CO Alarm Combo Unit and the SL177 Strobe Light for visual warning. The BRK SC9120B is a smoke and carbon monoxide combo alarm with battery backup. It features a dual ionization smoke sensing chamber and a carbon monoxide sensor, 85dB horn, 9B battery backup and a "silence" feature. Applications include residential and institutional applications including hospitals, hotels, motels, dormitories and other multi-family dwellings. The "Intelligent Sensing Technology" system is designed to reduce nuisance alarms. The "Latching Alarm Indication" remembers which unit initiated an alarm. When interconnected, the unit that triggered the alarm rapidly flashes its red LED indicator... Less

This system serves 2 important alerting functions. When the CO2 detector or smoke detector is activated it will send a signal to the sidekick receiver w/strobe, setting off the strobe as well as the vibrator. In addition, it can be used with other Silent Call transmitters. This system includes: 1 portable 6 audible 3V lithium battery-operated smoke detector with built-in transmitter, 1 Sidekick receiver w/strobe which plugs into an A/C outlet, 1 vibrator for under the pillow or mattress (3-year

First Alert SC7010B Smoke / CO Detector with Battery Backup & Strobe SMK_CO-KIT2This kit includes the BRK SC7010B hard-wired smoke/CO detector and the BRK SL177 Strobe Light. The BRK SC7010B is a hard-wired smoke and carbon monoxide combo alarm with battery backup. It features a photoelectronic smoke sensing chamber and electrochemical CO sensor. Applications include residential and institutional applications including hospitals, hotels, motels, dormitories and other multi-family dwellings.The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for those with hearing loss to hear the audible horn. This alarm features two latching features and two silence features. The Alarm Latch easily identifies the initiating alarm even after the alarm condition has... Less

The TX-6310-01-1 wireless carbon monoxide (CO) alarm monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect fire, smoke, or any other gas. If a dangerous concentration of CO is detected by patented and field-proven electrochemical sensor, an LED indicator illuminates and an internal siren is activated in temporal 4 pattern. The CO alarm also transmits an alarm signal to the control panel within 15 seconds of detecting dangerous concentration of CO gas. The control panel activates its internal siren and reports the alarm condition to the central monitoring station (if the system is monitored). The CO alarm also detects low battery, wall tamper, and sensor end-of-life. These trouble codes are transmitted to the control panel. The... Less

Carbon Monoxide/Smoke Combo Alarms provide two important safety devices in a single unit. These alarms with Smart Hush activation include a voice warning system that announces Fire, Carbon Monoxide and Low Battery. These technically advanced combination alarms use ionization sensors to detect fire. They are easy to install, suitable for all living areas and have a five-year limited warranty. Click on Technical Specifications tab for complete product info.Discounts available for large purchases. Please fill out a request for a quote or contact customer service at 1-800-511-8652.We carry a complete line of Carbon Monoxide Detectors and Smoke Alarms.

Suggested replacement C3000SCThe C13641 from KJB is a high quality CCD surveillance system camera virtually hidden inside a smoke detector. It features 1/4 inch BW CCD image sensor.The C13641 gives excellent picture quality with a high resolution of 420 TV lines and delivers clear images even in low light conditions with a minimum illumination of 0.05 Lux at F2.0. It has a signal to noise ratio of more than 48 dB and shows internal synchronization. The C13641 smoke detector has a choice of black and white or color video camera. If wired is not the solution you are looking for we also stock wireless versions of the same high quality item.

The SC0403 is a combination pack of Carbon Monoxide (CO) and smoke alarm. Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don't know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you're in danger at first. That's why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can't see, smell or taste in the air. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-Decibel horn. No installation is required and the attractive design allows the unit to be placed anywhere you need it. It includes an optional wall mount with no outlet required. An audible and visual low battery signal alerts... Less

The BRK SCO2B is a battery powered single station combination smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101

Lot sale of (3), New, Kidde Combination Smoke and CO (carbon monoxide) Detector / Alarms with Voice Alarm Indicator (Battery Operated) # 900-0102 item 706432 Quantity of (3) : Combination Smoke CO Alarms With Voice Alarm Indicator, Uses Voice Alarm To Designate Fire Or Carbon Monoxide Warning, Battery Operated With Low Battery Indicator, \ Test/Reset Button, 3 "AA" Batteries Included, Clam Shell Packaging, x (3)

What is carbon monoxide? Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas. CO is produced from devices such as heating systems and power tools which fail to function correctly or are not properly vented. Why should we test CO detectors? CO detectors protect lives by sampling the air and measuring the amount of CO present over a time period. If a dangerous level of CO is detected the detector will enter into alarm. Many states and municipalities now require CO detectors to be installed (see map over). In addition to this, new legislation is on the way which will make the installation and testing of CO detectors mandatory in all states. Is Solo C6 safe to use? Yes, when used correctly, and in accordance with manufacturers instructions SoloC6 poses no threat to... Less

Battery Smoke Detector with Escape Light and Photoelectric SensorThis alarm boasts a bright escape light that illuminates a path to safety when alarm sounds. This is extremely useful dealing with smoldering fires that can fill the home with thick smoke. The photoelectric sensor is ideal for detecting these slow burning fires and helps reduce unnecessary alarms from cooking smoke or shower steam. The alarm provides an easy access drawer for the battery with no need to remove it from the ceiling.Features:S moke detectorPhotoelec tric sensor with bright escape lightIdeal for cooking areasFeatures convenient silence and test button, blinking power light and an 85 decibel alarmIncludes side battery drawer and missing battery guardLow battery warningTamper resistantYou can install BRK Brands,... Less

Signature Series Smoke Detector with Transmitter SC-SS_SDTRThe new 418MHz Signature Series uses radio frequency technology, allowing you freedom and flexibility with outstanding features and increased range of up to 2,000 feet. Quickly know when you have visitors, telephone calls or emergencies with the bright flashing strobe and distinctive LEDs.The Signature Series Smoke Detector with Transmitter transmits to the Sidekick II Receiver, which will flash when it has been activated. Includes one 3V lithium battery. Three and five year warranty.What else do I need to make this work?This product will only work with 418MHz products in the Silent Call Signature Series. In order to be notified, you will need to purchase a Silent Call Signature Series Receiver.

Lot sale of (12), New, Kidde Combination Smoke and CO (carbon monoxide) Detector / Alarms with Voice Alarm Indicator (Battery Operated) # 900-0102 item 706432 Quantity of (12) : Combination Smoke & CO Alarms With Voice Alarm Indicator, Uses Voice Alarm To Designate Fire Or Carbon Monoxide Warning, Battery Operated With Low Battery Indicator, \ Test/Reset Button, 3 "AA" Batteries Included, Clam Shell Packaging, x (12)

770 SERIES PROJECTED BEAM SMOKE DETECTOR

Gentex Hard-wired for Wall Mount Smoke DetectorHard- wired for Wall MountThe 710CSW is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you will need an electrician to hook it up. One year warranty. The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photodiode confirms the presence of smoke for 2 consecutive pulses, it will produce the signal... Less

Smoke Detector Test Equpiment, Provides Open Delivery Testing, For Use With Residential Or Commercial Detectors, Includes Aerosol Extension Tools, Manufacturers Warranty Length 100 Percent Lifetime

The BRK SC9120B is a wire-in, 120V AC 60Hz single and/or multiple station smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101.

Every house, apartment, business has a smoke detector our Smoke detector camera systems is a perfect solution for video this one is a side view camera non functioning smoke detector, we integrate the camera right into the Side View Smoke detector so it is virtually hidden. Each Side View Smoke detector system comes in black/white or color video cameras just choose the one that’s right for your application. FEATURES: 92 degree field of view 3.6mm Lens 1/3 DSP Color CCD image Sensor, ¼ DSP B/W 380 lines of resolutions (color), 420 lines B/W 0.5 LUX Color, .05 B/W DC 12V power NTSC Audio is not available 4 3/4″ x 2 3/4″ x 1 7/8″ Transmitter / Receiver Specifications: 4-channel operations (camera) 8 channel scroll capable (receiver) 300 – 700 foot line of sight (LOS)... Less

NFPA 72, Table 7.2.2, states that ''detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.'' Smoke! in a can lets you meet this requirement without contaminating the detector, affecting its sensitivity, and increasing the risk of false alarms. Patented formula evaporates completely. Smoke! in a can is UL listed for all brands and models of photoelectric or ionization type smoke detectors. Its safe, non toxic formula contains no CFCs. After verifying smoke entry into the detector, you can walk away assured the Smoke! in a can will evaporate completely.

Battery Power Tamper-Proof Smoke Detector with Mute Button and Ionization Smoke SensorProvides full 10-years of protection. Tamper proof design eliminates removal of batteries for other uses and ensures operation over the life of the alarm.Features: Ionization sensing chamberSealed 10 year lithium battery powercell with tamperproof designSolid- state Piezo Horn Rated at 85dB at 10 Visual Red LED power-on indicator to confirm unit is receiving powerSingle button Test and silence featureReplaces SA10YR productYou can install BRK Brands, Inc. products with confidence! Our products are designed to save lives. It s a responsibility we don t take lightly. We build each smoke alarm, carbon monoxide alarm, heat alarm, and fire extinguisher to the highest standards. Over the years we ve seen... Less

Gentex Hard-wired for Ceiling Mount Smoke DetectorHard- wired for Ceiling MountThe 710CSC is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. This model is hard-wired so you would need an electrician to hook it up. One year warranty. The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to 8 times the normal pulse rate, and after the photodiode confirms the presence of smoke for 2 consecutive pulses, it will produce the... Less

Battery-powered combination smoke/CO alarm with voice and alarm warning. Type: Smoke/CO Detectors- Smoke/Carbon Monoxide Detector. Mounting: Universal Mounting Bracket. Compliance, Standards: UL Listed. Power Source(s): 3 AA. Warnings spoken in loud-volume voice: Fire, Fire! or Warning! Carbon Monoxide! . Announces Low Battery when batteries need changing. . Also includes chirp signal and flashing LED. . Test/reset button. . Batteries included.

Smoke Detector with Built-In Transmitter SC-SDTRFor use with Silent Call receiversVery simple to install and battery powered. If the smoke detector is "set off" the built-in transmitter sends a signal to any 318MHz Silent Call receiver. Sends a signal up to 500 feet away depending on the receiver used. Uses one 3V lithium battery (included).Three year warranty on smoke detector and five year warranty on Silent Call transmitter board.

770 SERIES PROJECTED BEAM SMOKE DETECTOR

Introducing the Anderson Fisher Regular Metal Detector Shaft in Carbon Fiber. Fisher Regular Shaft works with the 1280, CZ20, Impulse and will work with the new CZ21.Shaft is 27? and comes with a bracket that slides into the bottom of the detector housing. Housing is mounted between the handle and arm cuff. This is a compact setup with great balance.

This is a certified Brand New Digital carbon monoxide (CO) meter. This meter is very easy to use. With a push of button, you can measure the level of carbon monoxide in seconds, with accuracy up to a few parts per million (PPM). This CEM CO-180 meter is similar to Fluke CO-220, which is retailed for $290+. This meter uses the latest electrochemical sensors and can react to ambient changes in carbon monoxide quickly. It's an ideal tool for measuring CO levels in industrial environments, commercial buildings, or residential dwellings. This unit not only shows the reading in LCD display, it also beeps when the CO concentration is over 35 PPM (the higher the CO level, the faster the beep). *** FREE *** Limited time only: A belt carrying pouch and a rubber holster are included for extra... Less

The Down-View Smoke Detector hidden camera works best when mounted to the ceiling. Therefore it can be installed in various locations such as over a cash register or stock receiving doors. The smoke detector is non-functioning and cannot be used as a safety device. Powered by included 12V power supply.Includes: Wireless cameras include FREE 2.4 GHz receiver (a $160.00 value), Black and white cameras feature .003 Lux which allows best possible images in almost complete darkness. Camera requires some ambient light (night light, television).

Gentex (Battery Back-up)Wall Mount Smoke DetectorHard- wired for Wall MountAll the same features and quality as the other Gentex smoke detector models, except with battery backup. Battery backup operates audible alarm only. This is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. (This model is hard-wired so you would need an electrician to hook it up.) One year warranty. The smoke detector operates on the light scattering principle, a superior method of detection in smoldering fires. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases... Less

The FE-5000 is a U.L. 286-listed projected beam smoke detector that consists of up to four integrated transmitter, receiver detector heads and single low level remote control unit. The detector operates between a range of 26.25 ft. to 330 ft.