Straight Thread Connector, Ferulok(r), Tube Size 1 In, Thread Size 1 5/16-12, Tube To Male Sae-orb Connection, Material Of Construction 316 Stainless Steel, Pressure 4000 Psi, Temp Range -30 To 250 Degree F, Length 1.81 In, Standards Sae J514

Output Filter, Dv/dt, Voltage 600v & Below, Amps 130, Hp 100, Phase Three, Enclosure Type Open, Watts Loss 270, Features Increase Motor Life And Performance, Function Reduce Voltage Overshoots And Reflective Wave Due To Dv/dt, Application Output Of Vfd, When Motor Lead Length Is 100 Ft. To 1000 Ft., Height 9.5 In., Width 11 In., Depth 8.5 In., Standards Ul Listed, Ce Certified

Switch, Liquid Level, Wire Gauge 22, Float Length 3 In., Float Dia. 0.92 In., Max. Temp. 105 C, Max. Pressure 100 Psi, Float Material Buna N

You are bidding on a Browning Bushing Model Number: 200 BU 108 Also has # 200TGB108 App. Weight: 2 Lbs. Dimensions: 4.25" x 2" x 2" Cosmetic Condition Rating: 5 - Unused 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition

Saw Blade Reducing Bushings

Straight Thread Connector, Ferulok(r), Tube Size 3/8 In, Thread Size 3/4-16, Tube To Male Sae-orb Connection, Material Of Construction 316 Stainless Steel, Pressure 5000 Psi, Temp Range -30 To 250 Degree F, Length 1.28 In, Standards Sae J514

The Starrett 1025ME-130 stainless steel pocket slide caliper fits easily in a shop coat pocket and is precise to 1/64” inch and 1/2 mm for quick yet precise measurements. Readings are made directly from two lines marked “in” and “out” on one side of the caliper stock. The outside range is 0 to 3-3/4” (0 to 96 mm) while the inside range is 1/4 to 4” (6 to 100 mm). The back of the caliper stock has a metric scale to allow the caliper to be used as a steel rule as well, for easy and fast estimation of rough measurements. The knurled thumb piece activates the slide, while the slide stop prevents the tool from being disassembled. The clamp screw has a left hand thread for easy one-handed operation. The jaws have a straight measuring surface for outside measurements and rounded nibs for... Less

Dewalt DW130V Specifications: Chuck Size 1/2 " No Load Speed 0-550 rpm Max Watts Out 600 W Gear Reduction Triple Capacity In Wood (Spade Bit) 1-1/2 " Capacity In Wood (Self-Feed) 2-9/16 " Capacity In Wood (Hole Saw) 5 " Capacity In Wood (Auger Bit) 1-1/2 " Capacity In Steel (Twist Bit) 1/2 " Capacity In Steel (Hole Saw) 3 " Dewalt DW130V Includes: 3-Position side handle Chuck key with holder 2-Position rear spade handle Dewalt DW130V Features: Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling 0-550 RPM provides increased torque for drilling and mud mixing 9.0 AMPS 120V motor provides enough power for any job site application 7.5 lbs. (3.4 kg) increases user... Less

Work Stand, Low Storage, Top Width 30 In., Top Depth 18 In., Top Thickness 12 Ga., Work Surface Steel, 1-1/2 In. X 1-1/2 In. X 3/16 In. Angle Legs, Capacity 1200 Lb., All-welded, Corner Posts 1-1/2 In. X 1-1/2 In. X 3/16 In. Thick Angle, 3-sided Angular Bracing Between Corner Posts Construction, Powder Coated Finish, Gray, Overall Height 14 In., Overall Width 30 In., Overall Depth 18 In., Max. Height 14 In., Min. Height 14 In., Load Rating 1200 Lb., (1) 12 Ga. Steel, Flush Mounted Shelf

Spring Pin, Slotted, 302 Ss, Passivated Finish, Overall Length 1/4 In, Nominal Dia 1/8 In, Actual Dia 0.131-0.135 In Min-max, Chamfer Dia 0.122 In, Chamfer Length Min 0.008 In, Chamfer Length Max 0.044 In, Wall Thickness 0.028 In, Fits Hole Dia 0.125-0.129 In Min-max, Length Tolerance +/-0.015 In, Double Shear Strength 1090 Lb, Rockwell Hardness Work Hardened, Meets Ansi/asme B18.8.2, Package 100