Tools and Accessories

Axes

This kit contains five jigs for sharpening your knives, scissors, and axes as well as short chisel and carving tools. The Knife Jig is for most knives, width 45mm (1-3/4"), minimum blade length 60mm (2-3/8"). Long knives need to be stiff. Also for carvers draw knives. Long Knife Jig is for long and flexible knives, minimum blade length 160mm (6-3/8"). The 140mm (5-1/2") width of the jig stabilizes a thin blade. Scissors Jig works for scissors of all sizes and shears. Also suitable for portable electric hand planer blades. The Short Tool Jig is for straight shanked carving gouges and V-tools down to 45mm (1-3/4") length, short wood chisels, and tools for power carvers. Maximum tool width is 3mm (1-1/4"). The Axe Jig works for carving and carpenters axes.

Rapid Tool Guard - 700TG Rapid Tool Guard prevents rust on hand tools, blades & bits to improve performance and extend tool life. The protection penetrates deep to seal out harmful moisture and prevent corrosion. Tool Guard will dry after application to prevent sticky, slippery surfaces that attract dirt and dust like most lubricants and corrosion protection products do. Once dry it will resist oil and dirt build-up. Use Rapid Tool Guard to protect hydraulic rescue tools, axes, pry bars, saw blades, bolt cutters, air tools, drills and drill bits, router bits, wire and cable cutters, strippers, pliers, shears, knives, ratchets and much more! Rapid Tool Guard - Seals out harmful moisture and prevents corrosion Rapid Tool Guard - Prevents sticky, slippery surfaces Rapid Tool... Less

Non sparking soft face sledge hammers Flat area on head allows upright storage Urethane covering helps reduce noise pollution Steel reinforced handle provides added strength and safety, resists breaking on overstrike Dead blow function uses steel shot 8 lb Compo-Cast Sledgehammer is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Stanley.

The Starrett S668DZ shaft alignment clamp set includes two chain clamps, two 81-141J dial indicator gauges with lug-on-center backs, two PT18724 snugs, two extension plates, and various posts to perform radial and angular alignment of motors, pumps, and compressors. The set comes in a fitted case for organization and protection. The clamp set provides a pair of indicator gauges to measure alignment distortion, with a configurable armature to secure the gauges in position on two axes. The two chain clamps consist of a black anodized aluminum frame with a roller chain that can secure the clamp around a shaft up to 7.5 inches in diameter. The three pairs of 3/8-inch diameter posts measure to 5", 7-7/16", and 9" in length, and are made of stainless steel for rigidity. Two extension plates... Less

Slice through wood-cutting chores. Heavy-duty 12-lb. head and steel handle deliver more splitting force at impact. Application: Splitting maul, Head Weight (lbs.): 12, Handle: Steel, Ha...

Non sparking soft face sledge hammers Flat area on head allows upright storage Urethane covering helps reduce noise pollution Steel reinforced handle provides added strength and safety, resists breaking on overstrike Dead blow function uses steel shot 11.5 lb Compo-Cast Sledge Hammer is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Stanley.

Cold Steel Norse Hawk 90NThese superb tomahawks are precision drop forged from 1055 Carbon steel. Drop forging is the best method of manufacture for any impact weapon, particularly one with a cutting edge. During the forging process a metal ingot is heated almost white hot and then formed into shape in a series of progressive dies. The large steel dies are fixed to enormous compressed air hammers. Each die hammers the hot metal into a gradually more finished shape. The steel is kneaded and compressed into a completely homogeneous mass making the grain structure uniform and minimizing gas pockets or other imperfections that can ruin the construction of a hand forged hawk. This is why most good axes, hatchets, and hammers are drop forged.Capturing the Viking spirit, the Norse Hawk’s... Less

The Starrett S668CZ shaft alignment clamp set includes two chain clamps, two 196B5 back-plunger dial indicator gauges, two PT18724 snugs, two extension plates, and various posts to perform radial and angular alignment of motors, pumps, and compressors. The set comes in a fitted case for organization and protection. The clamp set provides a pair of indicator gauges to measure alignment distortion, with a configurable armature to secure the gauges in position on two axes. The two chain clamps consist of a black anodized aluminum frame with a roller chain that can secure the clamp around a shaft up to 7.5 inches in diameter. The three pairs of 3/8-inch diameter posts measure to 5”, 7-7/16”, and 9” in length, and are made of stainless steel for rigidity. Two extension plates provide... Less

Soft brass head is surface protective, non-sparking, non-marring, absorbs blows, and reduces rebound Striking face is machined flat for even blow distribution on off-center hits Brass Hammer 4 lbs is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Armstrong Tools.

Non-sparking Non-marring Absorbs shock Shot filled canister Urethane with steel reinforced handle 11.5lbs. Dead Blow Sledgehammer is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Armstrong Tools.

Gerber splitting axe is a simple, no-nonsense axe that gets the job done right Balanced and weighted for efficient impacts Forged steel head offers superior edge-retention Glass-filled nylon handle is virtually impossible to damage Overall length of 28.46-inches; backed by Gerber's limited lifetime warranty Product Description From the Manufacturer There's just something kind of satisfying about swinging a simple, no-nonsense axe. One that's balanced, and weighted for efficient impacts. That pretty much describes our Axes. Each one sports a forged stainless steel head. And edge retention that'll have people talking. And glass-filled nylon handles that are all but impossible to damage. Product Description This axe features a forged steel head that offers surperior edge-retention. The... Less

Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber Ergonomic handle absorbs shock, ensures comfort and slip-resistant grip High-visibility head adds instant identification under any job site conditions; encourages safe work habits HVS1430 14 lb Sledge Hammer Hi-Viz Yellow Head 30in. Handle is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Wilton.

Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber Ergonomic handle absorbs shock, ensures comfort and slip-resistant grip High-visibility head adds instant identification under any job site conditions; encourages safe work habits HVS830 8 lb Sledge Hammer Hi-Viz Yellow Head 30in. Handle is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Wilton.

The split-head hammer does the work of six different hammers because the face can be easily changed The BASA hammer has been the leading refractory hammer for decades Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed Size 5 Split-Head Rawhide Hammer is one of many Hammers, Sledges, Mallets & Axes available through Office Depot. Made by Garland Mfg.

Michigan single bit axes with precision ground cutting edges feature drop forged heads, heat treated and tempered for toughness, long edge life and capability for many sharpenings. Head Weight: 3.5 lb. Handle Length: 36 in.

Estwing E45A Campers Axe Metal Handle ***Brand New*** Product Description: For felling, trimming trees and or splitting wood, notching timbers, driving wooden or plastic stakes. Forged one-piece solid steel construction to eliminate loose heads Nylon vinyl deep cushion grips bonded to steel handle for comfort and durability. Since 1923, the Estwing family and its employees have taken pride in designing and manufacturing the world's most durable, comfortable and attractive striking and struck tools. All claw hammers, axes, specialty tools and pry bars are manufactured to the highest possible standards and offer a true value to both tradesmen and craftsmen alike. Product Description All steel, 26" long handled axe. Hudson Bay pattern with fully polished head, 4" cutting edge and nylon vinyl... Less

Item #: 577-1432DB. Steel shot30% more driving force with less effortEliminates sting, vibration, and reboundFor maximum safety in non-sparking applications near combustible materials. Head Weight = 3 lbFace Face Head Length = 4 5/8 inHead Width = 2 7/16 inHandle Length = 14 inHandle Grip Overall Head Material = RubberHandle Material = FiberglassType = Dead Blow Hammer Customers also search for: Tools and Storage\Hand Tools\Hammers, Sledges, Mallets and Axes\Dead Blow Hammers Discount Hammer Dead Blow 3 Lb, Buy Hammer Dead Blow 3 Lb, Wholesale Hammer Dead Blow 3 Lb, 662679020774, 1432DB, Dead Blow Hammers

Item #: 577-1364. Replaceable, screw-on tipsHard and medium, non-marring tip hammer head Face Face Head Length = 4 11/16 inHead Width = 1 11/16 inHandle Grip Overall Length = 13 1/8 inHead Material = PlasticHandle Material = FiberglassType = Soft Face HammerWt. = 2.06 lb FED SPEC. GGG-H-33a Customers also search for: Tools and Storage\Hand Tools\Hammers, Sledges, Mallets and Axes\Dead Blow Hammers Discount Soft Face Hammer 1-11/16", Buy Soft Face Hammer 1-11/16", Wholesale Soft Face Hammer 1-11/16", 662679020699, 1364, Dead Blow Hammers

Great price! Buy with confidence! This auction is for a brand new, factory sealed Anaconda 878 Slide-Hammer Manual Log Splitter Product Features: Slide-Hammer Pouding Action Splits Logs In Seconds Makes Axes, " Mauls Obsolete Expertly Split Logs With Incredible Ease Enhanced Safety, Even Youngsters Can Use It Place Wedge Tip On Log, Slide The Hammer Up Down In Seconds The Job Is Done No Dangerous Overhead Swinging, Flying Or Jammed Wedges, Broken Axe Handles Or Back-Breaking Labor Rubberiz

Work Sharp Knife & Tool Sharpener Designed to sharpen every knife you own Uses flexible abrasive belts to sharpen straight and curved bladed knives Two angle sharpening guides include a 2" guide for hunting and outdoor knives (25'bevel) Also able to sharpen other common tools including scissors, axes, hatchets, mower blades, garden shears and shovels Includes: 40'knife guide, 50'knife guide - includes serrated knife & scissor sharpening guides, abrasive belt kit - P90, P220, 6000, instructional DVD & users guide Images May Be Out Dated So They May Not Reflect Actual Color Size Or Style.)

This smooth-face framing hammer crafted by Estwing offers a forged one piece head and handle of tool steel, fully polished, and a blue nylon-vinyl, deep-cushion grip that's molded on and absorbs all shock. Since 1923, the Estwing family and its employees have taken pride in designing and manufacturing the world's most durable, comfortable and attractive striking and struck tools. All claw hammers, axes, specialty tools and pry bars are manufactured to the highest possible standards and offer a true value to both tradesmen and craftsmen alike.

Item #: 577-1430DB. Steel shot30% more driving force with less effortEliminates sting, vibration, and reboundFor maximum safety in non-sparking applications near combustible materials. Head Weight = 2 lbFace Face Head Length = 4 3/8 inHead Width = 2 inHandle Length = 12 3/4 inHandle Grip Overall Head Material = RubberHandle Material = FiberglassType = Dead Blow Hammer Customers also search for: Tools and Storage\Hand Tools\Hammers, Sledges, Mallets and Axes\Dead Blow Hammers Discount Hammer Dead Blow 2 Lb, Buy Hammer Dead Blow 2 Lb, Wholesale Hammer Dead Blow 2 Lb, 662679020736, 1430DB, Dead Blow Hammers

Finally, a Knife Sharpener anyone can use! No more messy oils or stones. In about 10 seconds, sharpen knives, (even serrated knives), cleavers, axes, machetes, and many other cutting tools. The large ergonomic handle fits either hand safely and securely. The full length finger guard protects your fingers. Sharpening blades are Diamond Honed Tungsten Carbide for years of reliable use. AccuSharp Knife Sharpeners will not rust and can be cleaned with soap and water or in the dishwasher..

Item #: 577-1332PD. Contoured handle with red lacquer gripPolished face, chamfer, cheeks, and peinsClear lacquer protective coating on face, chamfer, cheeks, and peinsRim tempered hardened face and peins Head Weight = 32 ozHead Handle Length = 16 3/16 inHandle Grip Overall Head Material = Drop Forged SteelFinish = PolishHandle Material = HickoryType = Ball Pein Hammer FED SPEC. GGG-H-86c|ANSI Spec. B173.2. Customers also search for: Tools and Storage\Hand Tools\Hammers, Sledges, Mallets and Axes\Ball Pein Hammers Discount Hammer Ball Pein 32 Oz, Buy Hammer Ball Pein 32 Oz, Wholesale Hammer Ball Pein 32 Oz, 662679020149, 1332PD, Ball Pein Hammers

Item #: 577-1444G. Well balancedFor heavy blows in areas with limited swing arc on chisels, punches, star drills and hardened nails. Head Weight = 4 lbFace Head Length = 4 3/4 inHead Width = 1 15/16 inHandle Length = 10 inHandle Grip Overall Head Material = Forged SteelHandle Material = FiberglassType = Hand Drilling Hammer FED SPEC. GGG-H-86c|ANSI Spec. B173.3 Customers also search for: Tools and Storage\Hand Tools\Hammers, Sledges, Mallets and Axes\Drilling Hammers Discount Hammer Hand Drilling 4 L, Buy Hammer Hand Drilling 4 L, Wholesale Hammer Hand Drilling 4 L, 662679020309, 1444G, Drilling Hammers

Use this jig to grind axes and hatchets with a maximum head length of 6-3/4" (170mm). The jig is designed so that the rotation of the stone presses the axe firmly into the jig. You only ned to hold and guide the axe with your hands. For use with the Tormek T-7 and T-3 sharpening systems.

The WoodlandPro competition work axe was designed by the former World Champion lumberjack, David Bolstad. Dave described this axe as "A true multi-purpose axe for the price of a descent working axe. It can be used for both work and practice. There are already some competitors using this axe in New Zealand and they are doing extremely well with it." The axe head is made from high carbon steel, but only hardened to 52 Rockwell C. This keeps the edge from chipping easily like high end professional axes, but still hard enough to hold an edge. These axes are very popular with collegiate teams and recreational choppers. This axe has a 31" hickory handle with a steel roll pin fitted through the center of the head for safety. Important Note: This axe is not designed to replace high end racing... Less

Flat side allows for standard sharpening and half round/taper allow for sharpening of curved and hard to get at places Handle 17/32-Inch thick by 3 9/16-Inch long Ideal for sharpening carbide tipped saw blades, router bits, pruners, sheers axes and most carbide and HSS tooling James Barry Guide to Diamond Sharpening DVD has section devoted to use of DWS/TF6/F, Trend Item number DVD/DWS/JB Suitable for woodturning gouge internal and external bevel edges, skews, carving tools, model engineering, routers, saw blades, small chisels, knives, serrated edges, metals and plastics, pruners, shears and all shaped tooling, Manufacturer: Trend

Gerber - Diamond Sharpeners for Knives Get rid of your old sharpening stones and replace it with a DIAMOND SHARPENER so that you can keep your knife's blade sharp and ready to cut. Gerber blades are some of the best in the industry and they don't skimp on quality with this RETRACTABLE SHARPENER. Check out all our Knives, Saws, Axes, and Multi Tools and Camping Gear. Key Features: Sharpening Surface Retracts for Easy Carrying Triple Diamond Plated Design Lightweight Compact Lifetime Warranty Model Number: 09841 UPC: 013658098411

This kit contains five jigs for sharpening your knives, scissors, and axes as well as short chisel and carving tools. The Knife Jig is for most knives, width 45mm (1-3/4"), minimum blade length 60mm (2-3/8"). Long knives need to be stiff. Also for carvers draw knives. Long Knife Jig is for long and flexible knives, minimum blade length 160mm (6-3/8"). The 140mm (5-1/2") width of the jig stabilizes a thin blade. Scissors Jig works for scissors of all sizes and shears. Also suitable for portable electric hand planer blades. The Short Tool Jig is for straight shanked carving gouges and V-tools down to 45mm (1-3/4") length, short wood chisels, and tools for power carvers. Maximum tool width is 3mm (1-1/4"). The Axe Jig works for carving and carpenters axes.