Air Cooled Spot Welder, Input Voltage @ 50/60hz 220 Vac, Open Circuit Voltage 2.5 Volts, Current Rating 30 Amps, Work Capacity Combined Thickness Mild Steel 3/16 Inches(4.7 Millimeters), Rated Output Current @ 6 In (152 Mm) 6750 Amps, Rated Output @ 50% Duty Cycle 2.5 Kilo Volt Amp, Rated Output Current @ 12 In (305 Mm) 5800 Amps, Rated Output Current @ 18 In (457 Mm) 4850 Amps, Overall Height 6 Inches/150 Millimeters, Overall Width 3 1/4 Inches/83 Millimeters

 BRAND NEW MILLER 040198 STD. 12" SPOT WELDER TONGS WITH 1 SET TIPS... Standard 12 in. Tongs

Water Cooled Spot Welder, 230 Vac, 90 A, Amps Ac 90, Work Capacity Mild Steel 1/4 In, 20 Kva, Rated Output 6 In 12,500a, Rated Output 12 In 10,500a, Rated Output 18 In 9000a, Ocv 3.55, Overall Height 49 In, Overall Width 11 In, Overall Depth 21.75 In, Sheet Metal

Also known as: LNXL4000; L4000Welder Autobody Dual-Spot Lencospot Mark II Features and Benefits: The Lencospot Mark II Autobody Dual-Spot Welder offers all these features: 50’ Power input cable, No. 10/3 wire Welding cable length: 5’ Maximum welding capacity: 20 gauge Autobody steel Weight: 110 lbs. Protected control panel Solid state timer Streamlined construction Tool storage space Off & On switch Easy portability ordering information Description: Lencospot Mark II primary voltage: 208/230 Single phase: 60/50Hz KVA  Rating: 4 Line fuse: 50 AMP Size: 20-1/2"H  X 11"W  X 16"L

G-7 8 2PC SET SPOT WELDER TONGS"

 BRAND NEW MILLER 040199 STD. 18" SPOT WELDER TONGS WITH 1 SET TIPS

Air Cooled Spot Welder, Input Voltage @ 50/60hz 110 Vac, Open Circuit Voltage 1.6 Volts, Current Rating 30 Amps, Work Capacity Combined Thickness Mild Steel 1/8 Inches(3.2 Millimeters), Rated Output Current @ 6 In (152 Mm) 5550 Amps, Rated Output @ 50% Duty Cycle 1.5 Kilo Volt Amp, Rated Output Current @ 12 In (305 Mm) 4500 Amps, Rated Output Current @ 18 In (457 Mm) 3600 Amps, Overall Height 6 Inches/150 Millimeters, Overall Width 3 1/4 Inches/83 Millimeters

Heavy-Duty Quality Dent Pulling System. This unit utilizes a wider range of draw pins for greater versatility. Includes heavy-duty Magna Spot 1500 stud welding gun, heavy-duty twist-to-lock slide hammer, 3 electrodes, 500 2 mm draw pins, 150 trim rivets, and a convenient molded carrying case. 5 year manufacturer's warranty.Can utilize a wider range ofdraw pins for greater versatility The Stud Welder Dent Pulling System makes pulling dents from one side possible without drilling holes Easy to use, simply remove paint from area to be repaired. Load draw pin into gun, push spring loaded stud welder gun against surface until outer contact ring touches surface, and depress the switch for.5 to 1 second to anchor the pin. Twist on the slide hammer pull out dent until flush. On larger dents when... Less

Air Cooled Spot Welder, Input Voltage @ 50/60 Hz 110, Open Circuit Voltage 1.6 Volts, Current Rating 30 Amps, Rated Output @ 50% Duty Cycle 1.5 Kva, Work Capacity Combined Thickness Mild Steel 1/8 Inches (3.2 Mm) Using 6 Inch Tongs, Rated Output Current @ 6 Inches (152 Mm) 5550 Amps, Rated Output Current @ 12 Inches (305 Mm) 4500 Amps, Rated Output Current @ 18 Inches (457 Mm) 3600 Amps, Overall Height 6 Inches, Overall Width 3 1/4 Inches, Depth 13 Inches, Welding Of Mild, Galvanized, Stainless

Air Cooled Spot Welder, 220vac, Amps Ac 30, Work Capacity Mild Steel Minimum 24 Gauge, Maximum 3/16 In, 2.5 Kva, Rated Output 6 In 6750 A, Rated Output 12 In 5800 A, Rated Output 18 In 4850 A, Ocv 2.5, Overall Height 6 In, Overall Width 3 1/4 In, Overall Depth 16 In, For Lower Amperage Welding Of Mild, Galvanized Or Stainless Materials, Power On/off Switch, Power Card And Interconnecting Card, Tongs And Tips Are Not Included

MO OFFSET 12 2PC SET SPOT WELDER TONGS"

eReaders Cameras Cell Phones Laptops & Netbooks Blu-Ray & DVD Players TV's & Monitors Home Theater Systems Apple See All Health & Beauty See All 110Volt/60Hz Spot Welder Welding Hand Machine Portable Welder Electronic Control Spot welder Single phase portable for easy moving or storing spot welding machine with electronic control of the sop welding time. Welds uncoated stock as thick as 1/8. Make quick, strong spot welds in mild, galvanized or stainless steel. Single phase Portable Electronic control Welds uncoated stock

 BRAND NEW MILLER 040211 STD. SPOT WELDER TIPS 1 SET of 2 tips

MIL900377 Features: -Price Is For One Each -Minimum Order Of 1.-UNSPC CODE: 23271400.-Spot Welders & Accessories Spot Welders Accessories.-LMSW 52 220. Specifications: -These lightweight, air-cooled units are portable, easy to operate, and provide a quick and effective means for spot welding mild, galvanized or stainless materials. These units are an excellent choice for maintenance work and for spot welding applications that require portability and lower amperage welding. ''''T'''' models include a timer panel with a 0 to 5 second weld timer and power on/off switch and come with a 10 ft (3 m) input power cord and 10 ft (3 m) interconnecting cord. The timer panel can be mounted on the optional SWP-2 pedestal or any other convenient location.. Warranty: -For spot welding mild, or... Less

Electrode Electric Spot Welder Welding - 30 Rated Duty Brand New Rating Input Voltage V: 110V Rated Duty %: 30 Class Insulation: H Applied Spot Welding Thickness: 1.0+1.0 Including: 2 Extra Tong Tips (total 4) Recommended Practices For Spot Welding Low-Carbon Steel Thickness "T" of Thinnest Out WorkPiece (B)(C)(D) Electrode Diameter Shape (E) Net Electrode Force Weld Time (Single Impulse Cycles) Welding Current (Approx) Minimum Contracting Overlap Minimum Weld Spacing(F) TYPE OF STEEL Inches Ma

Stud Welder Dent-Pulling System makes a hole-free dent repair, so it wont weaken the panel, and needs less filler3-step repair works without drilling holes, so it won't compromise the strength of the panel. The result is a professional- looking dent repair that requires minimal filler. Stud welder spot-welds pins onto the dented metal surfacePull the pins to pull-out the dentSnip the pins, then grind the rest downSpot-weld the pins, pull pins to pull-out dent, snip and grind them down The Stud Welder Dent Pulling System makes pulling dents from one side possible without drilling holes The Stud Welder Kit includes the Stud Welder Gun, Large Slide Hammer Puller with 2 lb sliding weight, and a package of 100 2mm Draw Pins. Easy to use, simply grind away paint in damaged area, load draw pin... Less

Welders File Set, Black, Number Of Pieces 7, American Pattern, Cut Type Bastard, Flat, Half Round Shape, Mill 46, Half Round 27, Pipeliner 18, Spot Weld 20, Mig Weld 38 Teeth Per Inch, Steel Material, Taper Yes, Single Cut, Except Spot Weld Edges, Ergonomic Handle, For Maintenance, Repair, Or Production Work

MO OFFSET 6 2PC SET SPOT WELDER TONGS"

You are bidding on a brand new USAWELD welding gun to fit the Pro Spot PR-155 Model 2 Mig welding machine. This gun is a direct replacement and uses the same spare parts as the original gun. Pro-Spot's part number is PR155-31. You can see from the 2nd picture, the handle is a nice ergonomic handle design. There is a nice spring to support the cable and prevent it from kinking. The 3rd picture shows you the power connection, and the 2 spade terminal trigger connections. The 4th picture shows you the gas connection. This machine uses the small 4mm OD plastic gas hose. If the welding gun on your Pro Spot welder is in a state of dis-repair, then replace it with a brand new one to give your machine like new performance. If you need a part for a Pro Spot

MILLER MSW-41 110V SPOT WELDER (900371) Tongs and tips sold separately

Also known as: MOT-JO1550, MOTJO1550; All the features of the 1500 kit, but loaded with every accessory required for today’s professional collision repair technician. 1 Magna-Spot 1550 Gun 1 Heavy Duty Slide Hammer 1 Molded Case 3 Electrodes 250 2.0 mm and 250 2.5 mm Draw Pins 150 Rivets Magna Clamp Magna T-Puller Magna Wire Electrode Kit

SPOT WELDER #CHIFW040 Offered by Rock Bottom Pricing, Inc. TOOL LIQUIDATORS Offered for sale is the Spot Welder #CHIFW040 Features: Technical Parameters: Rated Input Voltage: 110V/60Hz No-Load Voltage: 1.5V Throat Depth: 7" Rated Duty: 30" Input Capacity: 6.6KW Class of Insulation: H Welds As Thick As: 1/8" Weight: 26Kg Dimension: 515X140X235mm This item is 100% Brand NEW!! Please view our other great store items. WE DO COMBINED SHIPPING!! SPOT WELDER CHIFW040

STD 12 2PC SET SPOT WELDER TONGS"

115V ELECTRIC SPOT WELDER Brand new! Works Great With Mild, Galvanized, Even stainless steel 1/8" Rated Output Voltage: 110V / 60 Hz No-Load Voltage: 1.5 KVA Throat Depth: 7" (Lock Firmly Onto Material) Rated Duty Cycle: 30% Input Capacity: 6.6 KW Class Of Insulation: H Welds uncoated stock as thick as 1/8'' Works Great With Mild, Galvanized, Even stainless steel Dimension: 515 x 140 x 235 mm We accepted Paypal and CreditCard . FREE Shipping to Lower Continental 48 States only, Exclude to AK, H

MILLER 040197 STD. 6" SPOT WELDER TONGS WITH 1 SET TIPS...

Spot Welder Tip File, Black, 10 In, Number Of Pieces 1, American Pattern, Cut Type Bastard, Half Round Shape, 20 Teeth Per Inch, Steel Material, Taper No, For Dressing Spot Welder Tips, Package Quantity 1

The 10 kVA units weld materials up to 3/16 in (4.7 mm) total thickness, and the 20 kVA units can handle total thicknesses up to 1/4 in (6.3 mm). All PSW and SSW spot welders operate on single-phase input power. The PSW Series (portable models) feature the maneuverability often required in production line environments. The SSW models are designed for stationary use and come with an all-steel pedestal which houses timers and controls, as well as air and water connections. Portable and stationary air-operated models can be powered from a minimum of 60 PSI (920 kPa). AND SQUEEZE TIMER 230V Built-in squeeze/weld timer Cam-operated locking device simplifies installation and adjustment of bottom tong Ten-step current control Safety fuses on both sides of control circuit Quick and easy adjustment... Less

MIL903827 Features: -Price Is For One Each -Minimum Order Of 1.-Built-in squeeze/weld timer Cam-operated locking device simplifies installation and adjustment of bottom tong Ten-step current control Safety fuses on both sides of control circuit Quick and easy adjustment for material thickness Accommodates a wide variety of tongs and tips Air-operated (pneumatic) models.-Coolant system required to operate, order separately. Tongs and tips must be ordered seperately..-UNSPC CODE: 23271400.-Spot Welders & Accessories Spot Welders Accessories.-SSW 2040ATT STATIONARY W/WELD. Specifications: -The PSW and SSW Series of water-cooled resistance spot welders offer the power needed for light fabrication and sheet metal work. Choose the features you need including stationary and portable models,... Less

Our Feedback Score | Fast Shipping | Best Customer Service | Satisfaction Guaranteed Enter Ebay Store Add to Favorite Seller Shipping Information Payment Information 115V Electric Spot Welder Auto Darkening Welding Helmet Skull Style Combo Deal: Includes Everything You See In Pictures Features: 115V Electric Spot Welder Features: Rated Output Voltage: 110V / 60 Hz No-Load Voltage: 1.5 KVA Throat Depth: 7 (Lock Firmly Onto Material) Rated Duty Cycle: 30% Input Capacity: 6.6 KW Clas

Spot welder tip files Size: 10-Inch 1-Pack Available in all different cuts and sizes Only from Mercer Abrasives, Manufacturer: Mercer Abrasives